CEO Tech 50710 Panduan Penggunaan dan Perawatan - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Dudukan TV CEO Tech 50710. CEO Tech 50710 9 halaman. Fixed led / lcd tv wall mount

Halaman Cetak

Installation (continued)

Installing the wall plate

(concrete/brick wall)

If you are installing this mounting system in wood

studs, proceed to step 4.

CAUTION:

wiring and water pipes. The mounting system

must be attached to a weight bearing wall and

must be installed directly onto the center of the

wood studs. Failure to observe all safety

precautions can result in serious physical

injury and/or property damage. Consult a

professional installer or call customer service if

you have any questions.

CAUTION:

bricks or into loose concrete.

CAUTION:

□ Use the mounting rod (A) as a template to mark

the installation holes. Use a level to ensure the

plate is level.

□ Use a ¼ in. (6 mm) masonry drill bit too slowly

drill 3 in. (76 mm) pilot holes. Then use a 3/8 in.

(10 mm) masonry drill bit to expand pilot holes.

□ Insert anchors (AA) into the holes. Ensure the

anchors are completely flush to the concrete

surface even if covered by a layer of joint

compound or other material.

Avoid drilling near electrical

Do not drill into mortar between

Never drill into hollow brick.

Installing the wall plate

(wood stud)

CAUTION:

and water pipes. The mounting system must be

attached to a weight bearing wall and must be

installed directly onto the center of the wood

studs. Failure to observe all safety precautions

can result in serious physical injury and/or

property damage. Consult a professional installer

or call customer service if you have any

questions.

CAUTION:

than 2 x 4 in. in size.

□ Use a commercially-available stud finder to locate

the stud centers in the wall. Studs are usually

spaced 16 in. apart.

□ Use the mounting rod (A) as a template to mark the

installation holes. Use a level to ensure the plate is

level.

□ Use a 5/32 in. (4 mm) wood drill bit to drill 3 in. (76

mm) pilot holes.

Please contact 1-877-527-0313 for further assistance.

Avoid drilling near electrical wiring

Wood studs must be no smaller

HOMEDEPOT.COM