Green Lighting Corp GLC-SL32-3565 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pencahayaan Rumah Green Lighting Corp GLC-SL32-3565. Green Lighting Corp GLC-SL32-3565 8 halaman. High power led street light

Halaman Cetak

Warnings:

·Please strictly follow the installation instructions . Improper installation may cause electric

shock or Death.

·Warranty will be void in case of damage due improper installation.

·Power should not exceed stated range (rated voltage 90-264V, frequency 47-63Hz),

(Power AC220V must be switched off when wiring, make sure wires are connected

properly. To avoid damage, please do not install lamps right above objects such as stoves,

gas and exhaust channels or any hot objects.

·Ensure only qualified personnel install ,operate and maintain the Streetlamp.

Maintenance

1.change the power supply module, if the whole lamp does not work.

2.change the light source module(needs to be done by a qualified person), if a single LED

does not work.

3.Do not clean the lamps with volatile chemicals such as thinners (acetone) or gasoline,

doing so will damage the lamps and affect the lifespan.

Possible failures and solutions:

Failure

All the LEDs do not light up

LED flicker

a set of LED is dim

Few LED do not light

Reasons

Power input terminals are

not connected properly

Power fuse failed

Power output socket is

not connected properly

Power supply failed

LED damaged

Solutions

Re-connect to the power

input terminals

Change fuse

Re-connect to the output socket

Change power supply

Change power supply or

LED module

Change LED Module