HIKVISION H1T Series Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION H1T Series. HIKVISION H1T Series 15 halaman. Turbo hd dome camera
Juga untuk HIKVISION H1T Series: Panduan Pengguna (14 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (14 halaman), Panduan Pengguna (14 halaman)
Halaman Cetak
RESOLUTION
Resolution refers to the number of the pixels can be
displayed on the image. You can set the resolution as 5
megapixels or 4 megapixels. The higher the value, the
finer the image is.
FRAME RATE
Frame rate refers to the number of image output in 1
second.
When the resolution is set as 5 megapixels, you are
allowed to set the frame rate as 20 fps or 12.5 fps.
When the resolution is set as 4 megapixels, you are
allowed to set the frame rate as 25 fps or 30 fps.
VIDEO OUT
PAL
(Phase Alternating Lines) is a color encoding system for
analog television used in broadcast television systems in
most countries.
NTSC
(National Television System Committee) is the analog
television system that is used in most of North America,
parts of South America, Myanmar, South Korea, etc..
3.2 SMART FOCUS
You are allowed to adjust the focus by clicking FOCUS+,
or FOCUS-, and adjust zoom ration by click ZOOM+, or
ZOOM-.
3.3 EXPOSURE
Exposure describes the brightness-related parameters.
You can adjust the image brightness by the SHUTTER
FLICKER MODE, AGC, BRIGHTNESS, and D-WDR in
different light conditions.
Figure 3-4 EXPOSURE
SHUTTER
Shutter denotes the speed of the shutter.
PAL: AUTO, 1/25 s, 1/50 s, FLK, 1/200 s, 1/400 s, 1/1k s,
1/2k s, 1/5k s, 1/10k s, and 1/50k s are selectable.
NTSC: AUTO, 1/30s, 1/60s, FLK, 1/240s, 1/480s, 1/1k s,
1/2k s, 1/5k s, 1/10k s, and 1/50k s are selectable.
FLICKER MODE
Set the Flick Mode as ON to prevent the image from
flicker when the video out is not compatible.
AGC
It's a form of amplification where the camera will
automatically boost the image output signal to optimize
the clarity of image in poor light conditions. You can set
the AGC value from 0 to 15. The AGC is disabled if the
value is set to 0.