HIKVISION H1T Series Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION H1T Series. HIKVISION H1T Series 15 halaman. Turbo hd dome camera
Juga untuk HIKVISION H1T Series: Panduan Pengguna (14 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (14 halaman), Panduan Pengguna (14 halaman)

Halaman Cetak
HIKVISION H1T Series Panduan Pengguna
1 Introduction

1.1 Product Features

The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
 High performance CMOS sensor
 Low illumination, 0.01 Lux@(F1.2, AGC ON), 0 Lux
with IR
 IR cut filter with auto switch
 OSD menu with configurable parameters
 Auto white balance
 internal synchronization
 SMART IR mode
 3-axis adjustment
Note:
Type II camera is applicable to indoor only.
1.2 Overview
Note:
The cables of device vary according to different
models. The cables of each type are shown in the
figures below, please refer to the actual sample.
You can debug the camera by connecting an
auxiliary HD TVI cable to the auxiliary video output.
1.2.1 Overview of Type I Camera
Lens
Menu Button
Bubble
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Lens
Menu Button
Bubble
Figure 1-2 Overview of Type II Camera

2 Installation

Before you start:
 Make sure that the device in the package is in good
condition and all the assembly parts are included.
Cables
Auxiliary
Video Output
Back Box
Cables
Base Plate
Auxiliary
Video Output
Back Box
24 VAC/12 VDC
Power Cord
Model I Cables
12 VDC Power Cord
Video Cable
Model II Cables
24 VAC/12 VDC
Power Cord
Video Cable
Model I Cables
12 VDC Power Cord
Video Cable
Model II Cables
Video Cable