BRITAX RÖMER DUALFIX PRO Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kursi Mobil BRITAX RÖMER DUALFIX PRO. BRITAX RÖMER DUALFIX PRO 19 halaman.
Halaman Cetak3
Settings
3.1
Adjust headrest
1
Headrest
2
Harness buckle
3
Adjustment button
1. Check that the headrest 1 is adjusted correctly.
If the shoulder straps are at or slightly above the
shoulder height of the child, the headrest is posi-
tioned correctly.
If the headrest is not positioned correctly, per-
u
form the following steps.
2. To loosen the belt, press the adjustment button 3 and
pull both shoulder straps 5 forwards at the same time.
The shoulder pads are not connected to the shoul-
der straps. If you pull on the shoulder pads, the
belt is not loosened. Only pull on the shoulder
straps.
3. Keep the release button 6 pressed and slide the
headrest 1 to the correct shoulder height.
4. Check that the headrest 1 is locked correctly in place
by pushing the headrest 1 down.
P Headrest 1 is adjusted correctly.
P Headrest 1 is locked in place.
IP10165 | 1.5 | 2000038331
4
Shoulder pads
5
Shoulder strap
6
Release button
DUALFIX PRO | BRITAX RÖMER
3.2
Use the insert for newborn ba-
bies
1
1
2
3
4
5
6
1
Loops
2
Headrest
3
Insert for newborn ba-
bies
4
Shoulder straps
You must use the insert for newborn babies for body
sizes up to a maximum of 60 cm.
1. Open the harness buckle 5 by pressing the red button.
2. Place the insert for newborn babies 3 into the child
seat.
3. Place both shoulder straps 4 over the seat reducer.
4. Hang the two plastic hooks 7 in the loops 1 on the cov-
er of the headrest 1.
5. Pass the harness buckle 5 and the padded crotch 6
through the recesses in the lower section of the insert
for newborn babies.
7
7
3
5
Harness buckle
6
Padded crotch
7
Plastic hooks
5