Avantalk hm100 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headset Avantalk hm100. Avantalk hm100 17 halaman. Universal bluetooth motorcycle kit (headset + interphone)

Halaman Cetak

pin code 0000 to pair (some phones do not request the pin code);

E. Connect the headset to your phone. The LED indicator will flash twice every 4 seconds if

connected successfully.

F. HM100 is ready for use now.

2). Pairing with an another HM100 for interphone

A. Keep two interphones within 1 meters when pairing

B. Make one of interphones enter pairing mode

C. Press and hold MFB button of another interphone until Blue LED is steady.

D. The interphone whose blue LED is steady will automatically search and connect the

interphone which is in pairing mode. After successfully connecting, the blue LEDs of both

interphones will flash twice every 4 seconds.

3) Pairing with two Bluetooth Device.

A. Follow the above steps to pair it with one Bluetooth device, the LED will flash blue twice

every 4 seconds once successfully paired..

B. Press and hold the MFB button for 3-5 seconds until the LED flashes blue and red, and

HM100 enter pairing mode again.

C. Search the Bluetooth device and get them paired and connected.

D. Then HM100 pair and connect with two Bluetooth devices already.

Note: