IKEA KULINARISK Panduan Pengguna - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi IKEA KULINARISK. IKEA KULINARISK 36 halaman. Oven with steam feature
Juga untuk IKEA KULINARISK: Buku Petunjuk (20 halaman), Panduan Pengguna (36 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (32 halaman), Manual (36 halaman), Buku Petunjuk (48 halaman), Petunjuk Manual (36 halaman), Manual (24 halaman), Panduan Petunjuk Instalasi (36 halaman), Manual (20 halaman), Manual (44 halaman), Panduan Pengguna (36 halaman), Manual (40 halaman), Manual (40 halaman), Panduan Pengguna (20 halaman), Manual (37 halaman), Manual (32 halaman), Panduan Memulai Cepat (16 halaman), Manual (20 halaman), Manual (20 halaman), Manual (36 halaman), Manual (21 halaman), Panduan Memulai Cepat (8 halaman), Manual (40 halaman), Manual (20 halaman), Manual (32 halaman), Manual (36 halaman), Manual (17 halaman)

Halaman Cetak

ENGLISH

Problem

The oven does not heat up.

The lamp does not operate.

There is water inside the

oven.

The steam cooking does not

work.

The steam cooking does not

work.

It takes more than three mi-

nutes to empty the water

tank or the water leaks from

the steam inlet opening.

The display shows F111.

Possible cause

The necessary settings are

not set.

The automatic switch-off is

activated.

The Child Lock is on.

The door is not closed cor-

rectly.

The fuse is released.

The lamp is defective.

There is too much water in

the tank.

There is no water in the tank. Fill the water tank.

Lime obstructs the hole.

There are lime deposits in

the oven.

The plug of the core temper-

ature sensor is not correctly

installed into the socket.

Remedy

Make sure that the settings

are correct.

Refer to "Automatic switch-

off".

Refer to "Using the Child

Lock".

Fully close the door.

Make sure that the fuse is

the cause of the malfunction.

If the fuse releases again

and again, contact a quali-

fied electrician.

Replace the lamp.

Deactivate the oven and

wipe the water with a cloth

or sponge.

Check the steam inlet open-

ing. Remove the lime.

Clean the water tank. Refer

to "Cleaning the water

tank".

Put the plug of the core tem-

perature sensor as far as

possible into the socket.