IKEA LAGAN Manual - Halaman 14

Jelajahi secara online atau unduh pdf Manual untuk Kap Ventilasi IKEA LAGAN. IKEA LAGAN 32 halaman. Examples of the load of the basket
Juga untuk IKEA LAGAN: Manual Petunjuk Perakitan (8 halaman), Panduan Pengguna (20 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (20 halaman), Petunjuk Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (24 halaman), Manual (28 halaman), Buku Petunjuk (24 halaman), Panduan Pengguna (24 halaman), Manual (24 halaman), Manual (4 halaman), Panduan Pengguna (12 halaman), Manual (24 halaman), Manual Petunjuk Perakitan (20 halaman), Panduan Instalasi (20 halaman), Manual (28 halaman), Manual (32 halaman), Manual (44 halaman), Manual (16 halaman), Manual (16 halaman), Manual (24 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (28 halaman), Manual (40 halaman), Manual (48 halaman), Panduan Penggunaan & Perawatan (25 halaman), Manual (44 halaman), Manual (40 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (24 halaman), Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Petunjuk Instalasi (18 halaman), Manual (48 halaman), Panduan Memulai Cepat (4 halaman), Panduan Petunjuk Instalasi (16 halaman), Manual (28 halaman), Manual (28 halaman), Manual (44 halaman), Manual (48 halaman), Manual (16 halaman), Manual (24 halaman), Manual (25 halaman), Manual (18 halaman), Panduan Pengguna (28 halaman), Manual (44 halaman), Manual (24 halaman), Manual (32 halaman), Manual (18 halaman), Manual (48 halaman), Manual (29 halaman), Manual (29 halaman), Manual (34 halaman), Panduan Petunjuk Instalasi (42 halaman)

Halaman Cetak

ENGLISH

A. Previous button

B. OK button

C. Next button

Use Previous and Next to switch between

the basic settings and to change their value.

Use OK to enter the selected setting and to

confirm changing its value.

How to change a setting

Make sure the appliance is in setting mode.

1. Press Previous or Next until the

indicator dedicated to the desired setting

flashes.

The light related to

setting value:

• For the settings with two values (on

and off), the light is either on (= the

Before first use

1. Make sure that the current level of the

water softener agrees with the

hardness of the water supply. If not,

adjust the level of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start the programme Quick 30' to

remove any residuals from the

manufacturing process. Do not use

detergent and do not put dishes in the

baskets.

After starting the programme, the appliance

recharges the resin in the water softener for

up to 5 minutes. The washing phase starts

only after this procedure is complete. The

procedure is repeated periodically.

indicates the current

setting is on) or off (= the setting is

off).

• For the settings with multiple values

(levels), the light flashes. The number

of flashes indicates the current

setting value (e.g. 5 flashes + pause

+ 5 flashes... = level 5).

2. Press OK to enter the setting.

• The indicator related to the setting is

on.

• The other indicators are off.

• The light related to

current setting value.

3. Press Previous or Next to change the

value.

4. Press OK to confirm the setting.

• The new setting is saved.

• The appliance returns to the setting

selection.

5. Press and hold simultaneously

for about 3 seconds to exit

setting mode.

The appliance returns to the programme

selection.

The saved settings remain valid until you

change them again.

The salt container

Caution! Use rough salt designed

for dishwashers only. Fine salt

increases the risk of corrosion.

The salt is used to recharge the resin in the

water softener and to assure good washing

results in daily use.

indicates the

and