Britec WEH01 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanas Teras Britec WEH01. Britec WEH01 4 halaman. Electric

Halaman Cetak
The heater must be placed with a clearance of 100cm to the wall and 30cm to the ceiling.
The heater is extremely hot during operation. It keeps hot for a period after shutdown.
Potential danger would occur when touching it during this period.
Do not wrap power supply cord on the unit.
The heater must be handled with care, no violent vibration or hitting.
The heater must be securely grounded during operation.
In case of damage, it must be repaired by professional electricians.
Keep the heater and its cord out of reach of children less than 8 years.
This heater is not equipped with a device to control room temperature. Do not use this heater
in small rooms when they are occupied by persons not capable of leaving the room on their
own, unless constant supervision is provided.
CAUTION:
some parts of this heater can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
Do not use the heater as a cloth drier or tower drier.
Do not use the heater as a sauna heater.
Do not use the heater as a room heater.
Do not use the heater in place of animal propagating and raising.
Do not immerse the heater into water for cleaning.
ASSEMBLY
When unpacking the heater, please make sure that all the items are present and there are no
components left in the box and that all the parts are free from any packing material.
Do not connect the heater to electric supply until all the assembly is done.
Do not connect the heater to electrical supply if any of the components or power cord is damaged
any way. In case of any doubt, please contact your local supplier.
WALL MOUNTING INSTRUCTIONS
Attach wall bracket onto your heater with 2pcs M10x12 screws.
Drill 4 holes with a diameter of 12mm each on the wall.
Push 4 pcs self-tapping screw into the drilled holes.
While holding your heater, insert wall bracket into self-tapping screws.
Tightly lock the self-tapping screws.
WARNING: the heater must face downward during use.
After the assembly, plug the heater into a grounded 240/50Hz power outlet, and you are ready to
use the heater.