Avantco 360CRR2HCB Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Avantco 360CRR2HCB. Avantco 360CRR2HCB 7 halaman. Glass countertop merchandiser refrigerator
Temperature Controls
Use and Caution
• Your new refrigerator is already factory-set to run at optimum temperatures for food safety and should require
no adjustments.
Front Panel Operation
1. Set temperature:
Press
SET
button, the set temperature is displayed.
Press
or
Press
button to exit the adjustment and display
SET
the unit's current temperature.
2. If no more buttons are pressed within 10 seconds, the
unit's current temperature will be displayed.
3. Lights: Press
button to turn lights 'on' or 'off'. Manual start/stop defrost: Press
6 seconds to defrost or stop defrost.
4. Refrigerant LED: When the compressor is running, the LED is on; when the refrigerator temperature is constant,
the LED is off. During the delay start, the LED flashes.
5. Defrost LED: during the defrost cycle, the LED is on; when it stops defrosting, the LED is off. During the delayed
display of defrost, the LED flashes.
Electrical
• Please ensure that the required voltage is being supplied at all times.
• The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate over-current
protection. Please refer to the electrical requirements on the unit's nameplate.
• The unit should have its own dedicated outlet.
• Do not use extension cords.
• Ensure the unit is not resting on or against the electrical cord.
• If the unit is not in use for a long period of time, please unplug the unit from the outlet.
• To avoid shock and fire hazards, do not plug in or unplug the unit with wet hands.
• After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could cause
damage to the compressor.
www.AvantcoRefrigeration.com
4
to modify the displayed value.
User Manual
Glass Countertop Merchandiser Refrigerator
Digital Temperature Controller
Refrigerant LED
Defrost LED
SET
button and hold for