HIKVISION TurboHD H0T Series Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 17 halaman. Turbo hd bullet & dome camera
Juga untuk HIKVISION TurboHD H0T Series: Panduan Pengguna (17 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (18 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (17 halaman)

Steps:

1. Disassemble the turret camera by loosening the

screw.

2. Remove the mounting base from the main body.

Figure 2-19 Remove the Mounting Base

3. Drill the screw holes and the cable hole (optional)

on the ceiling.

4. Secure the mounting base on the ceiling with

supplied screws.

Figure 2-20 Secure the Mounting Base to the Ceiling

5. Route the cables through the cable hole, or the side

opening.

6. Secure the camera on the mounting base.

Pull out the clip plate, and then to combine

the camera with the mounting base.

Push the clip plate in, and secure the camera

by tightening the screw.

7. Connect the corresponding cables, such as power

cord, and video cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Tilt Position

[0° to 75°]

Figure 2-21 Secure the Camera

Pan Position

[0° to 360°]

Figure 2-22 3-Axis Adjustment

Rotation Position

[0° to 360°]