KitchenAid KDFX 6030 Lembar Produk - Halaman 4
Jelajahi secara online atau unduh pdf Lembar Produk untuk Mesin pencuci piring KitchenAid KDFX 6030. KitchenAid KDFX 6030 16 halaman.
Halaman Cetak
Quick Reference Guide / Overview
Before using the dishwasher, read the
installation and maintenance instructions
carefully!
On button
Off button
Programme selection button
Press button P (repeatedly) to bring up the
number of the desired programme on the display.
Time and failure display
With normal operation, the display indicates
residual time (h:min), while with the "Delayed
start" function selected it indicates time remaining
until the start of the programme (hh).
If "F.." appears on the display, see chapter "What to
do if..."!
Rinse aid level indicator and
Salt level indicator
These indicator lamps light up when rinse aid or
salt to be added. Add just before starting a wash
programme.
Select detergent
Press the button repeatedly to select the type of
detergent used.
Powder, gel, tab (standard): indicator off
Detergent with rinse aid: left indicator
Detergent with salt + rinse aid: right indicator
This deactivates the rinse aid and/or salt indicator
lamp.
Running Program Indicator
A LED light projected on the floor indicates
that the dishwasher is working.
Half Load/Multizone button
Load the upper or lower rack only.
Press once = wash upper rack (the
indicator/symbol lights up)
Press twice = wash lower rack (the
indicator/symbol lights up)
Press 3 times = Off (Half load/Multizone
deactivated).
When washing without the upper rack, press the
"Half load" (i.e. "wash bottom rack") button twice
(the corresponding indicator/symbol lights up).
Antibacterial rinse
This function activates an antibacterial rinse at the
end of the wash cycle, guaranteeing a further
reduction of bacteria. Press the button to activate
or deactivate the function. This function can be
used with those programmes marked with the
relative symbol in table 1.1.
The dishwasher door must be kept shut for the
entire duration of the programme in order to
guarantee reduction of bacteria. If the door is
opened the indicator lamps starts flashing.
"Delayed start" button
Press the button repeatedly to delay the start of
the programme. Delay adjustable from 1 to 24
hours. With successive touch of the button, the
delay start indicator increases by one hour and
after 24 returns to 00. Then press the start button.
The dishwasher will start at the set time.
Start button
Switches "on" when the dishwasher is operating.
Flashes when a fault occurs.
Switches off at the end of the programme.
Reset button - for changing
programme or failure display
Press this button to cancel a started programme
and selected options. Press this button to cancel
the main fault indicators (F..), for fault details
consult chapter "What to do if ...). A new
programme can then be selected and started.
4
3)