HIKVISION UD01984B Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION UD01984B. HIKVISION UD01984B 15 halaman. Hd 1080p turret & bullet camera
Halaman Cetak1.3 Overview of Bullet Camera
Power Cabl (12 V DC)
Video Cable (TVI)
Video Cable (CVBS)
Figure 1. 2 Overview of Bullet Camera
Chapter 2
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
mounting bracket.
If the wall is cement, insert expansion bolts before
you install the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do not
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Turret Camera
Steps:
1. Stick the drill template on the ceiling.
2. Drill the screw holes and cable hole (optional) on
the ceiling according to the supplied drill template.
Note:
Cable hole is required when adopting ceiling outlet to
route the cable.
Figure 2. 1 The Drill Template
3. Loosen the screw to remove the clip plate and take
off the main body.
Installation
Screw Hole Screw Hole
Screw
Clip Plate
Mounting Base
Screw Hole
120°
Main Body
Lens