KitchenAid KDIX 8810 Panduan Petunjuk Instalasi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Mesin pencuci piring KitchenAid KDIX 8810. KitchenAid KDIX 8810 12 halaman.
Halaman Cetak
Installation instructions
4. Immediately remove any excess caulking. Read
Instruction for Use of silicone to know time,
which silicone need to full durability. Do not use
dishwasher until silicone has full durability.
MAKE ELECTRICAL CONNECTION
Using a power supply cord.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Plug into a grounded 3 prong outlet.
CONNECT WATER SUPPLY
Water
fill line
connection
Water inlet valve
Check valve
Do not remove
check valve!
1. Connect the dishwasher water fill line.
2. Connect hot and cold water lines to the tap
unit.
3. Connect the sink and dishwashing drain
plumbing.
4. Turn water supply on the both dishwasher and
sink tap unit. Check for leaks.
COMPLETE INSTALLATION
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
1. Plug in dishwasher or reconnect power.
IMPORTANT:
The following steps must be done before using the
dishwasher, to test and activate the GFCI.
8