Ganz PixelPro GXi Series Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Konverter Media Ganz PixelPro GXi Series. Ganz PixelPro GXi Series 18 halaman. H.264 video encoder

Halaman Cetak

PixelPro GXi Series

3. PART NAMES

3.1. Blade

①

②

③

* Models herein and their appearance are subject to change without any prior notice.

① Screw

This is used to fasten the blade to the rack chassis.

② System Status LEDs

The LEDs indicate certain system information.

Status: This LED lights up as orange and turns green when the modules are powered on.

Data: This LED lights up when the host system is turned on with a connection is made.

The color of LEDs is subject to change according to the firmware version

Note

③ 12 pin terminal blocks for D/I, D/O, audio

Refer to the section "4.1. Connectors" for more specific information.

④ Video Input Configuration Switch

This switch enables video input and output to be turned on or off. No video comes in or out

with this switch off and only some test patterns will be displayed on the Webpage. You can

change the video standard format of the device by moving the switch to NTSC side or PAL side

as required. The device needs to be rebooted after moving the switch in order to apply the

change.

10-2013-A

○

ZS1-4DB1 Installation Guide