IKEA SILVERGLANS Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Pencahayaan Rumah IKEA SILVERGLANS. IKEA SILVERGLANS 4 halaman.
Juga untuk IKEA SILVERGLANS: Manual (12 halaman), Manual (48 halaman)

Halaman Cetak

English

HOW TO STEER YOUR LIGHTING

When the driver is connected to the mains, it is

possible to turn ON/OFF all products connected to

the driver, but if you want to dim or connect your

products to IKEA Smart lighting products, you need

to buy a separate steering device (e.g. a remote

control).

The steering device needs to be paired with your

driver/s. If you have more than one (1) driver you

can pair each one with the steering device, so that

the entire combination can be turned ON/OFF or

dimmed at the same time.

PAIRING A STEERING DEVICE TO YOUR DRIVER

1. Connect at least one (1) product to the driver

before you begin the pairing. Make sure that the

mains power is turned ON.

2. Locate the pairing symbol on the driver. Hold the

steering device close to the pairing symbol

(no more than 5 cm away).

3. Press and hold the pairing button on the

steering device for at least 10 seconds. A red

light will shine steadily on the steering device.

The product connected to the driver will begin to

dim and flash one time to indicate that the driver

is being paired to the steering device.

HOW TO FACTORY RESET YOUR DRIVER

If the driver does not respond or if you want to

un-pair the driver from a steering device you might

have to make a factory reset. The driver is forced to

factory reset by carefully push and hold the small

button (marked RESET) with a tip of pen on the

driver enclosure and applying a slight pressure. A

factory reset can also be done by toggle the main

switch 6 times.

IMPORTANT!

• The driver is for indoor use only and can be used

in temperatures ranging from 5ºC to 45 ºC.

• Do not leave the driver in direct sunlight or near

any heat source, as it may overheat.

• The declared radio range between the driver

and the steering device is measured in open air.

Different building materials and placement of the

units can affect the wireless connectivity range.

CARE INSTRUCTIONS

To clean the driver, wipe with a dry soft cloth.

Never use abrasive cleaners or chemical solvents

as this can damage the product.

PRODUCT SERVICING

Do not attempt to repair this product yourself, as

opening or removing covers may expose you to

dangerous voltage points or other risks.

TECHNICAL DATA

Type: ICPSHC24-30-IL44-1

Input: 220-240 VAC, 50/60 Hz, 0.23A

Output: 24.0V DC

Max total load: 1.24 A, 30.0 W

Radio range: 10 m in open air.

Operating frequency: 2405-2480MHz

Output power: 14 dBm

IP-class: IP44

Average active efficiency: 88.1 %

Efficiency at low load (10 %): 75.6 %

No load power consumption: 0.28 W

Indoor use only

Manufacturer: IKEA of Sweden AB

Address: Box 702, SE-343 81 Älmhult, SWEDEN

Declaration of Conformity

Hereby, IKEA of Sweden AB declares that the

radio equipment type ICPSHC24-30-IL44-1 is in

compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity can

be found at http://www.ikea.com

– Choose the country you are in

– Search your product in the search field

– Go to Assembly Instructions and Manuals

(downloads) Here will you find a pdf file of the

full DoC.

The crossed-out wheeled bin symbol indicates that

the item should be disposed of separately from

household waste. The item should be handed in for

recycling in accordance with local environmental

regulations for waste disposal. By separating a

marked item from household waste, you will help

reduce the volume of waste sent to incinerators

or land-fill and minimize any potential negative

impact on human health and the environment. For

more information, please contact your IKEA store.