KitchenAid KDTE204EPA Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring KitchenAid KDTE204EPA. KitchenAid KDTE204EPA 17 halaman.

Halaman Cetak

Add Rinse Aid

■

Your dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid, your dishes and dishwasher interior

will have excessive moisture. The heating and drying options will

not perform as well without rinse aid.

■

Rinse aid keeps water from forming droplets that can dry as spots

or streaks. It also improves drying by allowing water to drain off of

dishes after final rinse.

■

To add rinse aid, open the dispenser lid by gently pushing in the

center of the lid with your thumb while lifting up on the edge.

■

Pour rinse aid into the opening until the indicator level shows that it

is full.

■

Close dispenser by pushing down gently on the lid.

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

The most advanced and versatile cycle. ProWash™ cycle

senses the soil amount and toughness of soil to adjust the

cycle for improved performance using only the amount of

water and energy needed.

Use for hard-to-clean, heavily soiled pots, pans, casseroles,

and regular tableware.

This cycle, with only the Heat Dry option selected, and

without other options selected, is recommended to

completely wash and dry a full load of normally soiled dishes.

The energy usage label is based on this cycle and option

combination.

Use for lightly soiled items or china and crystal.

When you need fast results, the Express Wash will clean

dishes using slightly more water and energy. Select the Heat

Dry option to speed drying times.

Full

Add

CYCLE GUIDE

CYCLES

NOTE: For most water conditions, the factory setting

will give good results.

If you are experiencing poor drying performance,

you may want to try a higher setting. Turn the arrow

adjuster to a higher setting to increase the amount

of rinse aid.

Select a Cycle

Efficient dishwashers run longer to save water and energy, just as

driving a car slower saves on gas. Typical cycle time is approximately

2¹⁄₂ hours but can take less or more time to complete depending on

selections.

Select Options

You can customize your cycles by pressing the options desired. If you

change your mind, press the option again to turn off the option. Not all

options are available for every cycle. If an invalid option is selected for a

given cycle, the lights will flash.

Start or Resume a Cycle

NOTE: Run hot water at sink nearest your dishwasher until water is hot.

Turn off water.

■

If Start/Resume button is located on top of door, push door firmly

closed within 3 seconds of pressing START/RESUME. If door is not

closed within 3 seconds, the Start button LED will flash, an audible

tone will be heard, and cycle will not start.

IMPORTANT: If anyone opens the door (such as, for adding a dish,

even during the Delay Hours option), the Start/Resume button must be

pressed each time.

■

If the Start/Resume button is located on front of door, push door

firmly closed. The door latches automatically. Select wash cycle and

options and then press START/RESUME or press START/RESUME

to repeat the same cycle and options as in previous wash cycle.

SOIL LEVEL

Light to Medium

Tough/Baked-On

Heavy

Heavy/Baked-On

Light

Medium

Heavy

Light to Medium

Heavy/Baked-On

All soil levels

WASH TIME* (MINS.)

W/O OPTIONS

TYPICAL

MAX

110

150

125

190

125

190

140

205

110

150

110

150

125

190

105

145

120

185

WATER

USAGE

GALLONS

(LITERS)

3.8 (14.5)

5.0 (19.1)

7.7 (29.0)

7.9 (30.0)

2.8 (10.5)

4.0 (15.0)

7.9 (30.0)

4.2 (15.2)

7.7 (29.0)

6.2 (23.5)