HIKVISION 7216HVI-S Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk DVR HIKVISION 7216HVI-S. HIKVISION 7216HVI-S 6 halaman.
Halaman Cetak
1. Click the Next button
on the Wizard window.
This will take you to
the User Permission
window.
2. Navigate to the Admin
Password input field.
3. Enter the admin password into the Admin Password input
field. By default, the password is 12345.
4. To change the admin password, check the New Admin
Password checkbox. Enter the new password and confirm
the password in the given fields.
5. Click the Next button.
This will take you to
the HDD Management
window.
6. To start HDD
management, click the
Enter button.
7. If a new HDD was recently installed, select the HDD from
the list to initialize it.
Initializing the HDD
will format and
remove all data from
it.
8. After the HDD has
been initialized, click
the OK button which will take you back to the Setup Wizard
window.
2
Quick Start Guide - DS-7208 & 7216HVI-S Series DVR
9. Click the Next button.
This will take you to
the Record Settings
Window.
10. To enter the Record
Settings window, click
the Enter button.
11. Select the Schedule tab.
12. Click the Edit button.
This will open up a new recording schedule.
13. Check both the
Enable Schedule and
All Day checkbox. This
will enable the
recording schedule and
have it record
continuously all day.
14. Click the OK button.
This will take you back to the Schedule tab. To copy the
schedule to a different channel, select the channel or all
under Copy To and
click the Copy button.
15. Click the Next button.
This will take you to the
Network Settings
window.
16. To configure network
settings, click the Enter
button.
17. Enter the IP Address,
Subnet Mask and
Default Gateway.
18. Click the OK button to
return to the Setup Wizard.
19. If all the settings are entered as desired, click the Done
button to finish and exit the Setup Wizard.