Green Star V0801GS Panduan Pengoperasian - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Peralatan Dapur Green Star V0801GS. Green Star V0801GS 17 halaman.

Halaman Cetak

HELPFUL HINTS

CLEAN UP

Maintaining maximum cleanliness of your juicer is extremely important for both your

health and the peak performance of the machine. We recommend cleaning the juicer

immediately after each use, since cleaning the machine as quickly as possible is the

easiest way to remove food particles. However, if you want to juice throughout the day

without disassembling the machine, totally remove the Outlet Adjusting Knob, place a

large bowl under both the Juice Outlet and the Pulp Discharge Outlet, turn on the

machine and pour about 16 ounces of water through the machine.

1. Stains and Mineral Deposits

Colored stains and mineral deposits on parts are normal usage signs of a product.

But to remove color stains and mineral deposits.

1) Stains

- Do not use harsh chemicals such as bleach to remove food stains from the juicer.

- You can use a 25%-50% white vinegar/water solution and soak the parts overnight.

This may be repeated if necessary.

- Juicing green honeydew or cantaloupe melons may also lighten the stains.

- Stains from juicing carrots may be removed by gently rubbing the stains with olive oil

or canola cooking oil and a paper towel.

2) Mineral Deposits

- Using Baking soda

4 tablespoon of baking Soda

2 cups(16 oz) of lukewarm water

Soak the parts in the solution of water and baking soda overnight to loosen the

mineral deposit and to remove the colored stains. Wash with soap and warer and

use a hard bristled brush to remove mineral deposit. Wipe with cloth to dry.

- Mineral Deposits may be removed from the tips of the Twin Gears by running soaked

almonds through the machine.

- Another excellent way to remove mineral scales is to soak those affected parts in a

pure vinegar bath overnight. This loosens the scaling and much of it can be brushed

off. This process may be repeated as necessary. The vinegar used for de-scaling

can be stored for reuse. Please label the storage bottle properly so that it is not

accidentally used in food preparation.

2. The Screen

- Hold the screen under running water while brushing the pulp residue from inside

the screen first, and then the outside of the screen.

- For pulp that has been imbedded firmly in the holes of the screen, try soaking the

screen for a couple of hours in water after brushing away as much pulp as possible.

- You may also try using the DULL side of a table knife to rub along the inner surface

of the screen and then brushing from the outside with the Cleaning Brush.

3. The Main Body(Motor Unit)

To clean the motor unit of your juicer, position the front two legs over the edge of

the sink. With either the sink top sprayer, a spray bottle filled with water, or an empty

detergent bottle filled with water and equipped with its squirt-top, spray water directly

onto the front plate of the juicer where the drive shaft, mounting peg and free wheel

gear seats to remove pulp residue. Wipe any other exterior surfaces with a damp

cloth. DO NOT SUBMERGE THE MOTOR UNIT INTO WATER AT ANY TIME.

4. Others

- Use the narrow, pointed end of the cleaning brush to push food through out through

the pulp discharge outlet.

- Dried fruits and nuts can be very sticky on the inside surfaces of the juicer. To

remove the residue more easily run a couple of stalks of celery through before

disassembling the machine.

- To help the Twin Gears retain their shine, alternate between running one tablespoon

of carrot pulp and one teaspoon of granulated white sugar through the machine

several times.