IKEA finputsad Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring IKEA finputsad. IKEA finputsad 29 halaman. Integrated
Juga untuk IKEA finputsad: Manual (20 halaman), Buku Petunjuk (36 halaman), Manual (12 halaman), Manual (33 halaman)

Halaman Cetak

ENGLISH

All local waterboard regulations must be

complied with.

Water supply pressure 0.05 - 1.0 MPa.

The appliance must be placed against

the wall or built into furniture to limit the

access to its rearside.

For dishwashers having ventilation

openings in the base, the openings must

not be obstructed by a carpet.

If installing the dishwasher at the end

of a row of units making the side panel

accessible, the hinge area must be covered

to avoid risk of injury.

The inlet water temperature depends on

the dishwasher model. If the installed inlet

hose is marked "25°C Max", the maximum

allowed water temperature is 25°C. For all

other models the maximum allowed water

temperature is 60°C. Do not cut hoses

and, in the case of appliances fitted with

a waterstop system, do not immerse the

plastic casing containing the inlet hose

in water. If hoses are not long enough,

contact your local dealer. Make sure the

inlet and drain hoses are kink-free and are

not crushed. Before using the applinace

for the first time, check the water inlet and

drain hose for leaks. Make sure that the

four feet are stable and resting on the floor,

adjusting them as required, and check that

the dishwasher is perfectly levelled using a

spirit level.

Use the appliance only when the covers

shown on diagram 19 in the Assembly

instruction are correctly assembled - risk of

injury.

ELECTRICAL WARNINGS

The rating plate is on the edge of the

dishwasher door (visible when the door is

open).

It must be possible to disconnect

the appliance from the power supply by

unplugging it if plug is accessible, or by

a multi-pole switch installed upstream of

the socket in accordance with the wiring

rules and the appliance must be earthed in

conformity with national electrical safety

standards.

Do not use extension leads, multiple

sockets or adapters. The electrical

components must not be accessible to

the user after installation. Do not use the

appliance when you are wet or barefoot.

Do not operate this appliance if it has a

damaged power cable or plug, if it is not

working properly, or if it has been damaged

or dropped.

If the supply cord is damaged, it must

be replaced with an identical one by the

manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard

- risk of electrical shock.

If the fitted plug is not suitable for your

socket outlet, contact a qualified technician.

Do not pull the power supply cable. Do not

immerse the mains cord or plug in water.

Keep the cord away from hot surfaces.

CLEANING AND MAINTENANCE

WARNING: Ensure that the appliance

is switched off and disconnected from

the power supply before performing any

maintenance operation. To avoid risk

of personal injury use protective gloves

(risk of laceration) and safety shoes (risk

of contusion); be sure to handle by two

persons (reduce load); never use steam

cleaning equipment (risk of electric shock).

Non-professional repairs not authorized

by the manufacturer could result in a

risk to health and safety, for which the

manufacturer cannot be held liable. Any

defect or damage caused from non-

professional repairs or maintenance will

not be covered by the guarantee, the terms

of which are outlined in the document

delivered with the unit.