IKEA HYGIENISK Manual - Halaman 14

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring IKEA HYGIENISK. IKEA HYGIENISK 32 halaman.
Juga untuk IKEA HYGIENISK: Manual (32 halaman), Manual (28 halaman), Manual (29 halaman), Manual (28 halaman)

Halaman Cetak
IKEA HYGIENISK Manual
ENGLISH
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid dispenser
and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press
.
• The indicators
are off.
• The indicator
flash.
• The display shows the current setting:
e.g.
= level 4.
– The levels of rinse aid range from
0A to 6A where level 0A means
rinse aid is not used.
2. Press
repeatedly to change the
setting.
3. Press on/off to confirm the setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default, this acoustic signal is activated and
it is possible to deactivate it.
In addition, an acoustic signal will sound
before the AutoOpen will open the door.
This acoustic signal stops only if AutoOpen
is deactivated.
When pressing the main switch to turn on
the dishwasher, it makes a short beep
sound. The beep is activated by default, but
it is possible to deactivate it together with
the end of programme acoustic signal.
,
,
,
and
continues to
How to deactivate the acoustic signal for
the end of programme
Make sure the appliance is in user mode.
1. Press
• The indicators
and
• The indicator
• The display shows the current setting.
–
= the acoustic signal is
deactivated.
–
= the acoustic signal is
activated.
2. Press
to change the setting.
3. Press on/off to confirm the setting.
How to set the colour of the TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
Make sure the appliance is in user mode.
1. Press
.
• The indicators
and
• The indicator
• The display shows a number and
letter C. Each number refers to a
different colour.
–
= TimeBeam deactivated.
2. Press
repeatedly to change the
colour.
3. Press on/off to confirm the setting.
AutoOpen
AutoOpen improves the drying results with
less energy consumption. During the drying
phase, the door opens automatically and
remains ajar.
,
,
,
are off.
still flashes.
,
,
,
are off.
still flashes.
14