DecorQuip Dream Range 191685 Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Beralih DecorQuip Dream Range 191685. DecorQuip Dream Range 191685 5 halaman.

Halaman Cetak

PARING A WALL SWITCH AND INITIAL SETTINGS

Before starting the process of pairing a wall switch to a Dream motor, choose the channel to which it

is to be paired. Channel Zero is reserved for simultaneously controlling all blinds paired to a wall switch

and cannot be used for pairing, programming or other adjustments.

If using a battery powered motor, ensure that it is sufficiently charged to complete the set-up process.

Charging a motor from empty will take approximately 6 hours.

PARING A WALL SWITCH WITH A MOTOR

Press P1

for 2sec

Note:

After pairing a wall switch and before setting limits, the motor will be defaulted to jog-mode. To switch to continuous-mode,

see ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG MODE AND CONTINUOUS MODE.

SWITCHING DIRECTION

SETTING THE TOP LIMIT

Run blind to

top position

SETTING THE BOTTOM LIMIT

Run blind to

bottom position

Motor

jogs x1

Release

Press together

for 2sec

Press together

Motor

beeps x1

Press for 2sec

within 10s

Motor

jogs x1

DIRECTION

SWITCHED

Motor jogs x2

Beeps x3

for 2sec

Motor jogs x2

Beeps x3

for 2sec

Motor

jogs x2

beeps x3

PAIRING

COMPLETE

TOP

LIMIT SET

BOTTOM

LIMIT SET