HIKVISION DS-2CE18U8T-IT3 Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk DVR HIKVISION DS-2CE18U8T-IT3. HIKVISION DS-2CE18U8T-IT3 14 halaman. Turbohd 4k series bullet camera
Juga untuk HIKVISION DS-2CE18U8T-IT3: Panduan Pengguna (16 halaman), Panduan Memulai Cepat (17 halaman)
Halaman Cetak
To avoid heat accumulation, good ventilation is
required for the operating environment.
Keep the camera away from liquid while in use for
non-water-proof device.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
8 MP high performance CMOS sensor
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
internal synchronization
SMART IR mode
3-axis adjustment
1.2 Overview
This manual applies to two types of bullet cameras.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Table 0-1 Mark Description
Description
DC Voltage
Bracket
Main Body
Lens
Figure 1-1 Overview of Type I Camera
Bracket
Main Body
Lens
Figure 1-2 Overview of Type II Camera
Power Cord
12 VDC
Video Cable
(TVI)
Video Cable
(CVBS)
Power Cord
12 VCD
Video Cable
(TVI)
Video Cable
(CVBS)