IKEA IUD9500WX4 Panduan Petunjuk Instalasi - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Mesin pencuci piring IKEA IUD9500WX4. IKEA IUD9500WX4 48 halaman. Undercounter dishwasher
Juga untuk IKEA IUD9500WX4: Petunjuk Pengguna (25 halaman)
![IKEA IUD9500WX4 Panduan Petunjuk Instalasi](/uploads/products/server2/2083658/2083658.png)
edges
)rilithrough
these holes
Customer-supplied
panel
Install the two #8-18 x 13/8"screws from the literature package in
the top corners of the inner panel. Tighten the six side screws
reinstalled in Step 6.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Using 2 or more people, stand the dishwasher up.
IMPORTANT: The dishwasher must be secured to the cabinet.
There are two brackets found in the parts bag. Attach the
brackets using Option Number 1 if the countertop is wood,
laminate or another similar surface. If your countertop is marble,
granite or another hard surface, install using Option Number 2.
Option 1, Countertop attachment:
Tabsmust point
_-=::_
t0the [ght
Remove the brackets from the package and insert into the open
slots on the left and right-hand top of the dishwasher collar as
shown.
Using a pair of pliers, bend the tab down to secure the bracket in
place. Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
Option 2, Dishwasher
side attachment:
NOTE: Remove the brackets from the parts package.
Break end of bracket
Break off the end of the bracket along the scored line.
With another person holding the rear of the dishwasher to keep it
from tipping, open dishwasher door and place towel over pump
assembly and spray arm of dishwasher. This will keep screws
from falling into pump area when you are securing dishwasher to
cabinet.
Plastic
Push the plastic buttons out of the side of the tub.
NOTE: Save the buttons to cover the holes after dishwasher is
installed.
Push bracket into slot on the side of dishwasher, and bend tab in
toward the side of the dishwasher so that it keeps the bracket in
place. Repeat this step for the other side of the dishwasher.
NOTE: Do not attach the dishwasher. This will be done later.
17