IKEA IUD9750WS4 Petunjuk Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Mesin pencuci piring IKEA IUD9750WS4. IKEA IUD9750WS4 25 halaman. Undercounter dishwasher
Juga untuk IKEA IUD9750WS4: Panduan Petunjuk Instalasi (48 halaman)

Halaman Cetak

OPTIONS

DISH LOAD TYPES

DESCRIPTIONS

USE WITH:

Control Lock

To avoid unintended use of

To turn on Lock, press and hold Heat Dry for at least

Heated

your dishwasher, or cycle

4 seconds.

and option changes during

To turn off Lock, press and hold Heat Dry for at least

Dry

a cycle.

4 seconds.

Anytime

When Control Lock is lit all buttons are disabled. If you press

any pad while your dishwasher is locked, the light flashes

3 times. The dishwasher door can be opened while the

Heated

controls are locked.

Dry

Control

Lock

IM PORTANT:

•

The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the

best wash performance.

If the incoming water is less than the recommended

temperature or food soils are heavy, the cycle will

automatically compensate

by adding time, heat and water as needed.

•

The very first wash cycle after installation in your home will be adjusted to include an additional 2 rinses. This cycle must not be

interrupted for proper sensor adjustment. If this adjustment cycle is canceled or stopped before the Clean light comes on at the end of

the cycle, the next wash cycle will repeat this sensor adjustment.

CONTROL

PURPOSE

COMMENTS

START

To start or resume a

If the door is opened during a cYcle orthe power is interrUpted, the Start/Resume

indicator

wash cYCle

f!ashes. The CYC! e will not resume unti ! the door is closed and Start/Resume is pressed,

RESUME

To cancel wash

cycle

Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher

drain completely.

@sanitized

TOfollow the

The Clean indicator glows when a cycle is finished.

@Clean

progress of your

. :

i .

. :

.....

if you select the San]tEe option, when the SanltEe cycle is finished, the SamtEed indicator glows.

Cllsnwasner cycle

If your dishWasher did not pr0perly sanitize your dishes, the light f!ashes at the end 0f the cycle:

Washing

This

can happen if the cyc!e is interrupted, or the wate_ C0U!d not be heated to the required

@ Drying

temperature: The !ight g0es off when Y°U 0Pen and c!0se the door or press CANCELi

Drying System.

:;-,

t I i-_'"

During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat

,_ ....

dries your dishes.

".'. " ;

y,, • ;

IMPORTANT: The vapor is hot. Do not touch the vent during the drying cycle,