IKEA IWM60 Panduan Pemilik - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin pencuci piring IKEA IWM60. IKEA IWM60 28 halaman. Clothes washer
Juga untuk IKEA IWM60: Panduan Pengguna (5 halaman), Panduan Pengguna (24 halaman), Petunjuk Manual (20 halaman), Manual (20 halaman)
![IKEA IWM60 Panduan Pemilik](/uploads/products/server2/2083774/2083774.jpg)
ENGLISH
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the
button 2.
3. Press button 4:
– the appliance starts its countdown.
– The programme will start after the
selected delay has expired.
Cancelling the delayed start after having
started the programme:
1. Set the washing appliance to PAUSE by
pressing button 4.
2. Press button 2 once, the light relevant
to the selected delay goes off
3. Press button 4 again to start the pro-
gramme.
The Delay Start can not be selected with
DRAIN programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the de-
lay time. If you need to open the door, you
must set the appliance to PAUSE (by press-
ing the button 4) and then wait a few mi-
nutes. After you have closed the door, press
the button 4 again.
Start the programme by pressing button 4
To start the selected programme, press the
button 4, the corresponding green indicator
light stops blinking. The indicator light cor-
responding to the running phase illumi-
nates. The appliance starts operating and
the door is locked.
To interrupt a programme which is running,
press the button 4: the corresponding green
indicator light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 4
again. If you have chosen a delayed start,
the appliance will begin the countdown.
If an incorrect option is selected, the red in-
dicator light of the button 4 blinks 3 times.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must
PAUSE the appliance by pressing the button
4.
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to O and then to the new pro-
gramme position. Start the new programme
by pressing the button 4 again. The wash-
ing water in the tub will be not emptied out.
Interrupting a programme
Press the button 4 to interrupt a programme
which is running, the corresponding green
indicator light starts blinking.
Press the button again to restart the pro-
gramme.
Cancelling a programme
Turn the selector dial to O to cancel a pro-
gramme which is running.
You can select now a new programme.
Opening the door
After the programme has started the door is
locked. If, for any reason, you need to open
it, set firstly the appliance to PAUSE by
pressing the button 4. After a few minutes it
will be possible to open the door.
If the door remains locked, this means that
the appliance is already heating or that the
water level is too high. In any case, do not
try to force the door!
If you cannot open the door but you need
to open it you have to switch the appliance
off by turning the selector dial to O. After a
few minutes the door can be opened (pay
attention to the water level and tempera-
ture!).
After closing the door, it is necessary to se-
lect the programme and options again and
to press button 4.
At the end of the programme
The appliance stops automatically. The in-
dicator light of button 4 and the indicator
light corresponding to the just finished
washing phase goes off. The light 3.3 illumi-
nates. After a few minutes the door can be
opened.
12