IKEA LAGAN Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring IKEA LAGAN. IKEA LAGAN 20 halaman. Examples of the load of the basket
Juga untuk IKEA LAGAN: Manual Petunjuk Perakitan (8 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (20 halaman), Petunjuk Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (24 halaman), Manual (28 halaman), Buku Petunjuk (24 halaman), Panduan Pengguna (24 halaman), Manual (24 halaman), Manual (4 halaman), Panduan Pengguna (12 halaman), Manual (24 halaman), Manual Petunjuk Perakitan (20 halaman), Panduan Instalasi (20 halaman), Manual (28 halaman), Manual (32 halaman), Manual (44 halaman), Manual (16 halaman), Manual (16 halaman), Manual (24 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (28 halaman), Manual (40 halaman), Manual (48 halaman), Panduan Penggunaan & Perawatan (25 halaman), Manual (44 halaman), Manual (40 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (24 halaman), Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Petunjuk Instalasi (18 halaman), Manual (48 halaman), Panduan Memulai Cepat (4 halaman), Panduan Petunjuk Instalasi (16 halaman), Manual (28 halaman), Manual (28 halaman), Manual (44 halaman), Manual (48 halaman), Manual (16 halaman), Manual (32 halaman), Manual (24 halaman), Manual (25 halaman), Manual (18 halaman), Panduan Pengguna (28 halaman), Manual (44 halaman), Manual (24 halaman), Manual (32 halaman), Manual (18 halaman), Manual (48 halaman), Manual (29 halaman), Manual (29 halaman), Manual (34 halaman), Panduan Petunjuk Instalasi (42 halaman)

Halaman Cetak

ENGLISH

Problem

The lamp does not

work.

The compressor oper-

ates continually.

Water flows on the rear

plate of the refrigera-

tor.

Water flows into the re-

frigerator.

Water flows on the

ground.

The temperature in the

appliance is too low/

high.

If your appliance is still not working proper-

ly after making the above checks, contact

the After Sales Centre. You can find the list

at the end of this manual.

Replacing the lamp

Caution! The appliance is equipped

with a longlife LED interior light.

1. Disconnect the plug from the mains

socket.

Possible cause

The lamp is defective.

The temperature is not set

correctly.

The door is not closed cor-

rectly.

The door has been opened

too frequently.

The product temperature is

too high.

The room temperature is too

high.

During the automatic defrost-

ing process, frost defrosts on

the rear plate.

The water outlet is clogged.

Products prevent that water

flows into the water collector.

The melting water outlet does

not flow in the evaporative

tray above the compressor.

The temperature regulator is

not set correctly.

Solution

Refer to "Replacing the lamp".

Set a higher temperature.

Refer to "Closing the door".

Do not keep the door open

longer than necessary.

Let the product temperature

decrease to room temperature

before storage.

Decrease the room tempera-

ture.

This is correct.

Clean the water outlet.

Make sure that products do

not touch the rear plate.

Attach the melting water outlet

to the evaporative tray.

Set a higher/lower tempera-

ture.

2. Remove the

screw from

the lamp

cover.

3. Remove the

lamp cover.

4. If needed

replace the

lamp with a

light of simi-

lar characteristic and power. It is sug-

gested to use E14 LED light with maxi-

mum 1,5 Watts.

5. Install the lamp cover.

6. Tighten the screw to the lamp cover.

7. Connect the plug to the mains socket.