IKEA LAGAN Manual - Halaman 17

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring IKEA LAGAN. IKEA LAGAN 24 halaman. Examples of the load of the basket
Juga untuk IKEA LAGAN: Manual Petunjuk Perakitan (8 halaman), Panduan Pengguna (20 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (20 halaman), Petunjuk Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (24 halaman), Manual (28 halaman), Buku Petunjuk (24 halaman), Panduan Pengguna (24 halaman), Manual (24 halaman), Manual (4 halaman), Panduan Pengguna (12 halaman), Manual (24 halaman), Manual Petunjuk Perakitan (20 halaman), Panduan Instalasi (20 halaman), Manual (28 halaman), Manual (32 halaman), Manual (44 halaman), Manual (16 halaman), Manual (16 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (28 halaman), Manual (40 halaman), Manual (48 halaman), Panduan Penggunaan & Perawatan (25 halaman), Manual (44 halaman), Manual (40 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (24 halaman), Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Petunjuk Instalasi (18 halaman), Manual (48 halaman), Panduan Memulai Cepat (4 halaman), Panduan Petunjuk Instalasi (16 halaman), Manual (28 halaman), Manual (28 halaman), Manual (44 halaman), Manual (48 halaman), Manual (16 halaman), Manual (32 halaman), Manual (24 halaman), Manual (25 halaman), Manual (18 halaman), Panduan Pengguna (28 halaman), Manual (44 halaman), Manual (24 halaman), Manual (32 halaman), Manual (18 halaman), Manual (48 halaman), Manual (29 halaman), Manual (29 halaman), Manual (34 halaman), Panduan Petunjuk Instalasi (42 halaman)

Halaman Cetak

ENGLISH

Gas setting conversion

You can use this model with

natural gas. However, you can

convert it for use with other

gases, providing the correct

injectors.

For more information on injector

replacement, refer to the Technical data

chapter.

Warning! Conversion or

replacement can only be

performed by a authorised

technician.

To replace injectors:

1. Remove pan support.

2. Remove burner cap and crown.

3. Using a socket spanner 7, unscrew and

remove the injectors, and replace them

with the ones required for the type of

gas in use.

4. Reassemble the parts, following the

same procedure backwards.

Place the label with relevant

information for new type of gas

close to the supply pipe before

sealing the appliance. If the

appliance is already sealed

please stick it directly on the user

manual booklet, after Technical

data chapter, and close to the

rating plate drawing.

You can find this label in

package supplied with

appliance.

If the feeding gas pressure is

different or variable from the

required one, you must install an

appropriate pressure adjuster,

which is not supplied with the

product. If needed, it must be

ordered separately from the

local After Sales Service Provider,

refer to the Service chapter. The

pressure adjuster must be fitted

on gas supply pipe, in

compliance with the rules of the

force.

The rating plate is located below the

surface of the casing.

Adjusting flame level

When you install the hob, it is necessary to

check the minimum flame setting:

1. Turn the gas tap to the maximum

position and ignite.

2. Set the gas tap to the minimum flame

position and turn the control knob from

minimum to maximum several times. If

the flame is unstable or extinguished,

follow the procedure further.

3. Re-ignite the burner and set to

minimum.

4. Remove the control knob and the

gasket.