IKEA LAGAN Panduan Penggunaan & Perawatan - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Penggunaan & Perawatan untuk Mesin pencuci piring IKEA LAGAN. IKEA LAGAN 25 halaman. Examples of the load of the basket
Juga untuk IKEA LAGAN: Manual Petunjuk Perakitan (8 halaman), Panduan Pengguna (20 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (20 halaman), Petunjuk Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (24 halaman), Manual (28 halaman), Buku Petunjuk (24 halaman), Panduan Pengguna (24 halaman), Manual (24 halaman), Manual (4 halaman), Panduan Pengguna (12 halaman), Manual (24 halaman), Manual Petunjuk Perakitan (20 halaman), Panduan Instalasi (20 halaman), Manual (28 halaman), Manual (32 halaman), Manual (44 halaman), Manual (16 halaman), Manual (16 halaman), Manual (24 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (28 halaman), Manual (40 halaman), Manual (48 halaman), Manual (44 halaman), Manual (40 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (24 halaman), Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Petunjuk Instalasi (18 halaman), Manual (48 halaman), Panduan Memulai Cepat (4 halaman), Panduan Petunjuk Instalasi (16 halaman), Manual (28 halaman), Manual (28 halaman), Manual (44 halaman), Manual (48 halaman), Manual (16 halaman), Manual (32 halaman), Manual (24 halaman), Manual (25 halaman), Manual (18 halaman), Panduan Pengguna (28 halaman), Manual (44 halaman), Manual (24 halaman), Manual (32 halaman), Manual (18 halaman), Manual (48 halaman), Manual (29 halaman), Manual (29 halaman), Manual (34 halaman), Panduan Petunjuk Instalasi (42 halaman)

Halaman Cetak

IKEA LAGAN Panduan Penggunaan & Perawatan

5. Using a 5/16 in. socket, remove the

3 screws from the top hinge, and set

hinge aside (see Figure 1A).

NOTE

Keep the screws so they can be used

on the opposite side.

6. Using a 5/16 in. socket, unscrew

the center hinge pin. Open the

refrigerator door 90º, by hand,

remove the pin, and lift the door off

the bottom hinge pin.

IMPORTANT

Place door on padded surface to

avoid damage.

7. Using a T25 Torx Head screwdriver,

remove the 3 center hinge screws,

and set center hinge aside (see

Figure 2).

Hinge

Hole

Plug

Figure 2

8. By hand, remove the bottom hinge

cover from both sides (open on the

sides and pull up).

9. Using a T20 Torx Head screwdriver,

remove the door stopper screw, and

remove door stopper (see Figure 3).

10. Using a 5/16 in. socket, unscrew the

bottom hinge pin (see Figure 3).

11. Reinstall the bottom hinge pin in the

left side hole on the left side hinge

(see Figure 3).

12. Flip the door stopper. Reinstall the

door stopper on top of the bottom

hinge with the screw (see Figure 3).

REVERSAL INSTRUCTIONS

13. Install the bottom hinge covers.

14. Using a putty knife gently remove

15. With a flathead screwdriver, pry out

Hinge

Screws

Center

Hinge

16. With a flathead screwdriver, pry out

17. Reinstall the center hinge bearing in

18. By hand, reinstall the center hinge

DOOR REMOVAL/

Figure 3

the 3 center hinge hole covers (see

Figure 4A) and install on the opposite

side of the cabinet (see Figure 4B).

Figure 4

the center hinge bearing from the

top of the refrigerator door (see

Figure 5A).

the center hinge bearing plug from

the opposite side of the refrigerator

door (see Figure 5B).

Figure 5

place of the plug removed in previ-

ous step. Using a hammer, gently tap

it all the way in.

bearing plug on the opposite side of

the door.