Avantco 177DDPO18DDM Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur Avantco 177DDPO18DDM. Avantco 177DDPO18DDM 15 halaman. Countertop electric pizza oven

Halaman Cetak

User Manual

Oven Installation

1. After removing the outer shipping carton and packaging material, place the oven on the

floor or other flat surface.

2. Open oven and remove any instructions or packaging material shipped in the unit.

3. With sufficient help, lift up the front of the oven and attach the two front legs (packed

separately in styrofoam), carefully twisting each one into a corner and hand-tightening.

Lift the back of the oven approximately 5 inches and block into position using a piece of

wood or other solid object. Then, attach the two back legs and hand tighten.

4. Move the oven to its final location. Adjust the bottom portion of the legs to level the unit.

(Fig. 1)

Locating and leveling the unit:

• For non-combustible surfaces, do not install the unit closer than 4" from a side wall and/or

closer than 4" from a rear wall.

• The unit is required to be installed on a non-combustible surface with 4" legs, or a

combustible floor with a stand.

• Your unit includes four adjustable feet. Ensure that all feet are installed correctly before the

operation of this unit.

• Level unit by adjusting the (4) feet which have an adjustment of 1¾" (43.75mm) for accurate

leveling.

• Locate the unit in an area where the ambient air temperature is constant and a maximum of

104°F (40°C). Avoid areas that may be subject to active air movements or currents (i.e. near

exhaust fans/hoods and air conditioning ducts).

Exhaust canopy:

• This product conforms to UL-197 standards and is required to be installed under a ventilation

hood in accordance with all applicable codes.

• A vertical distance of not less than 48" shall be provided between the top of the appliance

and filters or any other combustible material.

• Exhaust installation must conform to local codes.