Avantco 177DDPO18SA Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur Avantco 177DDPO18SA. Avantco 177DDPO18SA 15 halaman. Countertop electric pizza oven

Halaman Cetak
Avantco 177DDPO18SA Panduan Pengguna
User Manual
• Clean heavily soiled pizza decks by scraping down, brushing off, removing from
oven, turning over, and putting back. This procedure will burn off the decks and
should be repeated every six months. DO NOT USE WATER TO CLEAN THE DECKS
as this could cause the decks to crack.
• Be sure cordierite pizza deck is dry. Wet spots or spills will cause food to stick.
• Never season the cordierite pizza deck with any type of baking oil.
• Scrape off burnt residue from pizza deck daily with a deck brush. Buildup can cause
an "off" flavor and increase bake time.
• Frozen items cannot be placed directly on hot deck to thaw. Place food onto a
screen or into a pan.
• Increase temperature during heavy production times to maintain ideal baking
temperature. Be sure to decrease it when rush slows to prevent burning.
• Pizza with heavy toppings requires a lower temperature and longer baking time.
• If toppings need more time to cook, a piece of screen placed under pizza can
prevent bottom from overcooking.

Troubleshooting

PROBLEM
No power.
Machine stops
Hi-limit safety tripped.
working
Transformer blown.
Machine stopped
working after being
Hi-limit safety tripped.
turned off
Sensor stops working.
The LCD displays
error code "HI"
Relay stops working.
The LCD displays
Sensor of upper heating element stops working.
error code "Er-1"
The LCD displays
Sensor of lower heating element stops working.
error code "Er-2
The LCD displays
PCB stops working.
error code "Er-4
12
PROBABLE CAUSE
SOLUTION
Check if the machine is plugged into a properly
working outlet.
Reset hi-limit.
Change new PCB.
Reset hi-limit. Make sure to allow the oven to cool
completely with the door(s) open. This will prevent
the oven from tripping hi-limit.
Change new sensor.
Change new PCB.
Change new sensor.
Change new sensor.
Change new PCB.
www.AvantcoEquipment.com