IKEA RENGORA Manual - Halaman 11
Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring IKEA RENGORA. IKEA RENGORA 32 halaman. Ikea dishwasher
Juga untuk IKEA RENGORA: Panduan Pengguna (24 halaman), Panduan Pemilik (48 halaman), Manual (24 halaman), Manual (28 halaman), Panduan Petunjuk Instalasi (16 halaman), Manual (28 halaman), Manual (12 halaman), Buku Petunjuk (29 halaman), Manual (29 halaman)
Halaman Cetak
ENGLISH
ENGLISH
DELAY
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
Make sure the cap is screwed on tightly, so that no detergent can
ENGLISH
ENGLISH
The start time of the program may be delayed for a period
get into the container during the wash program (this could damage
the water softener beyond repair).
of time between 1 and 12 hours.
ENGLISH
ENGLISH
As soon as this procedure is complete, run a program without
1. Press the DELAY button: the corresponding «h» symbol
loading. The "Pre-Wash" program alone is NOT� � � � � �
NATURALDRY
appears on the display; each time you press the button,
Residual saline solution or grains of salt can lead to corrosion,
Door opening system NaturalDry is a convection drying system
ENGLISH
ENGLISH
DELAY
DELAY
DELAY
DELAY
irreparably damaging the stainless steel components.
DELAY
DELAY
DELAY
DELAY
the time (1h, 2h, etc. up to max. 12h) from the start of
which automatically opens the door during/after drying phase
The guarantee is not applicable if faults are caused by such
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
the selected wash cycle will be increased.
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
to ensure exceptional drying performance every day. Door
circumstances.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
2. Select the wash program, press the START/PAUSE
DELAY
DELAY
opens at the temperature that is safe to your kitchen furniture.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
button and within 4 seconds close the door: the timer
As additional steam protection, special designed protection foil
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
ENGLISH
of time between 1 and 12 hours.
of time between 1 and 12 hours.
heating element may be damaged as a result.
will begin counting down.
is added together with the dishwasher. To see how to mount
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY
DELAY
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
Whenever you need to add salt, it is mandatory to complete
protection foil please refer to (ASSEMBLY INSTRUCTION).
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h»
the selected wash cycle will be increased.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
the procedure before the beginning of the washing cycle.
appears on the display; each time you press the button,
NaturalDry functionality could be disabled by the user as
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
of time between 1 and 12 hours.
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
follows:
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
To adjust the delay time and select a shorter period of time,
SETTING THE WATER HARDNESS
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
will begin counting down.
will begin counting down.
will begin counting down.
will begin counting down.
will begin counting down.
will begin counting down.
will begin counting down.
1. Go to the Dishwasher software menu pressing and holding
press the DELAY button. To cancel it, press the button
To allow the water softener to work in a perfect way, it is essential
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
button (6 sec).
for 5 seconds, until you hear a beep.
DELAY
that the water hardness setting is based on the actual water hard-
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
switches off and the wash cycle begins.
switches off and the wash cycle begins.
switches off and the wash cycle begins.
switches off and the wash cycle begins.
switches off and the wash cycle begins.
switches off and the wash cycle begins.
2. You switched to NaturalDry Control Menu, you could change
ness in your house. This information can be obtained from your local
the selected wash cycle will be increased.
will begin counting down.
The start time of the program may be delayed for a period
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
water supplier. The factory setting is for average (3) water hardness.
status of NaturalDry functionality by pressing button
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
of time between 1 and 12 hours.
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
E – enabled d – disabled
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol
• Switch on the appliance by pressing the ON/OFF button.
has been started.
to select the desired hardness level (see
will begin counting down.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
«h» switches off.
To confirm the change and exit from the Control Menu
«h» switches off.
«h» switches off.
«h» switches off.
«h» switches off.
appears on the display; each time you press the button,
«h» switches off.
• Switch off the appliance by pressing the ON/OFF button.
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
please press and hold
the time (1h, 2h, etc. up to max. 12h) from the start of
• Hold down button
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
has been started.
has been started.
has been started.
has been started.
has been started.
has been started.
Water Hardness Table
has been started.
the selected wash cycle will be increased.
has been started.
• Switch on the appliance by pressing the ON/OFF button.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
2. Select the wash program, press the START/PAUSE
•
The current selection level number and the salt indicator light
°dH
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
Level
button and within 4 seconds close the door: the timer
� � � � � �
German degrees
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
has been started.
has been started.
will begin counting down.
•
Press button
«h» switches off.
«h» switches off.
Soft
0 - 6
3. Once this time has elapsed, the indicator light «h»
WATER HARDNESS TABLE).
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
Medium
switches off and the wash cycle begins.
7 - 11
Program
has been started.
has been started.
Program
Program
Program
To adjust the delay time and select a shorter period of time,
Program
Program
Program
Program
Average
12 - 17
Program
press the DELAY button. To cancel it, press the button
Level
Hard
18 - 34
repeatedly until the selected delayed start indicator light
Program
«h» switches off.
Very hard
35 - 50
1
Soft
Eco
Eco
Eco
Eco
1
1
1
Eco
Eco
1
1
1
Eco
1
Eco
1
1
1 Eco
The DELAY function cannot be set once a wash cycle
2
Medium
has been started.
Program
Conventional
Conventional
Conventional
2 Conventional
Conventional
Conventional
Conventional
Conventional
3
Average
Eco
2
2
1
1
Conventional
2
2
2
2
2
2
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
2
4
Hard
wash and dry
Conventional
5
Very hard
Intensive
Intensive
3
3
Intensive
Eco
3
Intensive
Intensive
1
2
2
1
3 Intensive
3
3
Intensive
3
Intensive
3
3
wash and dry
Intensive
3
• Switch off the appliance by pressing the ON/OFF button.
Program
Conventional
Fast
Fast
Fast
4
4
4
Setting is complete!
Fast
Fast
Intensive
4 Fast Wash
4
4
Fast
2
3
3
2
4
Fast
4
4
wash and dry
Fast
4
FILLING THE RINSE AID DISPENSER
Sanitizing
Sanitizing
Sanitizing
5
5
5
Sanitizing
Sanitizing
Eco
Fast
5
5
Sanitizing
1
4
4
5 Sanitizing
5
3
Intensive
3
Sanitizing
5
5
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
should be filled when the RINSE AID REFILL indicator light
Conventional
Pre-Wash
Pre-Wash
6
6
Pre-Wash
Sanitizing
Sanitizing
6
Pre-Wash
Pre-Wash
Pre-Wash
5
5
5
6
6
6
in the control panel is lit.
Fast
6 Pre-Wash
2
4
Pre-Wash
4
6
6
wash and dry
Self-Clean
Self-Clean
7
7
Self-Clean
7
Self-Clean
Self-Clean
Pre-Wash
7
7
Self-Clean
6
Sanitizing
6
7 Self-Clean
7
5
Self-Clean
Intensive
5
3
7
7
Pre-Wash
B
6
Self-Clean
7
Pre-Wash
7
6
Fast
6
4
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Self-Clean
7
ECO program data is measured under laboratory conditions
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
according to European Standard EN 60436:2019.
Self-Clean
7
Sanitizing
7
5
address: [email protected]
address: [email protected]
address: [email protected]
address: [email protected]
address: [email protected]
address: [email protected]
address: [email protected]
address: [email protected]
Note for Test Laboratories: For information on comparative
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
1. Open the dispenser B by pressing and pulling up the tab on
EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Pre-Wash
6
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
the lid.
address: [email protected]
address: [email protected]
address: [email protected]
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
2. Carefully introduce the rinse aid as far as the maximum
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
(110 ml) reference notch of the filling space - avoid spilling it.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Self-Clean
7
programs.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
address: [email protected]
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
address: [email protected]
If this happens, clean the spill immediately with a dry cloth.
address: [email protected]
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
3. Press the lid down until you hear a click to close it.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
**) Values given for programes other than the eco program are
NEVER pour the rinse aid directly into the tub.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
indicative only. The actual time may vary depending on many
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
water, room temperature, amount of detergent, quantity and
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
address: [email protected]
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
type of load, load balancing, additional selected options and
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
load, load balancing, additional selected options and sensor calibration.
sensor calibration.
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
1. ECO - Eco program is suitable to clean normally soiled
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
tableware, that for this use, it is the most efficient program
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
in terms of its combined energy and water consumption, and
that it is used to assess compliance with the EU Ecodesign
PROGRAMS DESCRIPTION
legislation.
2. CONVENTIONAL WASH AND DRY - Mixed soil. For normally
soiled dishes with dried food residues.
If you are not completely satisfied with the drying results, you can
adjust the quantity of rinse aid used.
Make sure the cap is screwed on tightly, so that no detergent can
• Switch the dishwasher on using the ON/OFF button.
get into the container during the wash program (this could damage
• Switch it off using the ON/OFF button.
the water softener beyond repair).
• Press button
As soon as this procedure is complete, run a program without
• Switch it on using the ON/OFF button.
loading. The "Pre-Wash" program alone is NOT� � � � � �
•
The current selection level number and rinse aid indicator light flash.
Residual saline solution or grains of salt can lead to corrosion,
•
Press button
irreparably damaging the stainless steel components.
s.
supplied.
The guarantee is not applicable if faults are caused by such
• Switch it off using the ON/OFF button.
circumstances.
Setting is complete!
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
ENGLISH
supplied. The LOW RINSE AID indicator light will not be lit if you
heating element may be damaged as a result.
Whenever you need to add salt, it is mandatory to complete
run out of rinse aid. A maximum of 5 levels can be set according to
ENGLISH
the procedure before the beginning of the washing cycle.
the dishwasher model. The factory setting is specific to the model,
please follow instruction above to check this for your machine.
appears on the display; each time you press the button,
SETTING THE WATER HARDNESS
DELAY
• If you see bluish streaks on the dishes, set a low number (1-2).
the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH
The start time of the program may be delayed for a period
To allow the water softener to work in a perfect way, it is essential
• If there are drops of water or limescale marks on the dishes,
the selected wash cycle will be increased.
appears on the display; each time you press the button,
of time between 1 and 12 hours.
that the water hardness setting is based on the actual water hard-
set a high number (3-4).
DELAY
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
button and within 4 seconds close the door: the timer
ness in your house. This information can be obtained from your local
ENGLISH
The start time of the program may be delayed for a period
the selected wash cycle will be increased.
appears on the display; each time you press the button,
will begin counting down.
water supplier. The factory setting is for average (3) water hardness.
of time between 1 and 12 hours.
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
FILLING THE DETERGENT DISPENSER
the selected wash cycle will be increased.
DELAY
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
button and within 4 seconds close the door: the timer
• Switch on the appliance by pressing the ON/OFF button.
switches off and the wash cycle begins.
ENGLISH
2. Select the wash program, press the START/PAUSE
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
appears on the display; each time you press the button,
the selected wash cycle will be increased.
The start time of the program may be delayed for a period
will begin counting down.
• Switch off the appliance by pressing the ON/OFF button.
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
dishwashers.
of time between 1 and 12 hours.
will begin counting down.
• Hold down button
the selected wash cycle will be increased.
DELAY
To achieve the best washing and drying results, the combined
1. Press the DELAY button: the corresponding «h» symbol
button and within 4 seconds close the door: the timer
3. Once this time has elapsed, the indicator light «h»
switches off and the wash cycle begins.
2. Select the wash program, press the START/PAUSE
• Switch on the appliance by pressing the ON/OFF button.
ENGLISH
appears on the display; each time you press the button,
useof detergent, rinse aid liquid and refined salt is required.
The start time of the program may be delayed for a period
switches off and the wash cycle begins.
will begin counting down.
button and within 4 seconds close the door: the timer
•
The current selection level number and the salt indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of
of time between 1 and 12 hours.
To adjust the delay time and select a shorter period of time,
We recommend using detergents that do not contain phosphates
will begin counting down.
the selected wash cycle will be increased.
� � � � � �
press the DELAY button. To cancel it, press the button
DELAY
button (3 sec).
3. Once this time has elapsed, the indicator light «h»
1. Press the DELAY button: the corresponding «h» symbol
for 5 seconds, until you hear a beep.
or chlorine, as these products are harmful to the environment.
switches off and the wash cycle begins.
2. Select the wash program, press the START/PAUSE
ENGLISH
repeatedly until the selected delayed start indicator light
•
Press button
appears on the display; each time you press the button,
switches off and the wash cycle begins.
The start time of the program may be delayed for a period
Good washing results also depend on the correct amount of
button and within 4 seconds close the door: the timer
«h» switches off.
To adjust the delay time and select a shorter period of time,
the time (1h, 2h, etc. up to max. 12h) from the start of
of time between 1 and 12 hours.
WATER HARDNESS TABLE).
will begin counting down.
The DELAY function cannot be set once a wash cycle
detergent being used.
°fH
press the DELAY button. To cancel it, press the button
the selected wash cycle will be increased.
DELAY
1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h»
has been started.
2. Select the wash program, press the START/PAUSE
repeatedly until the selected delayed start indicator light
French degrees
Exceeding the stated amount does not result in a more effective
appears on the display; each time you press the button,
switches off and the wash cycle begins.
The start time of the program may be delayed for a period
«h» switches off.
button and within 4 seconds close the door: the timer
to select the desired hardness level (see
the time (1h, 2h, etc. up to max. 12h) from the start of
To adjust the delay time and select a shorter period of time,
of time between 1 and 12 hours.
wash and increases environmental pollution.
0 - 10
The DELAY function cannot be set once a wash cycle
will begin counting down.
Level
the selected wash cycle will be increased.
press the DELAY button. To cancel it, press the button
DELAY
The amount can be adjusted to the soil level. In the case of
1. Press the DELAY button: the corresponding «h» symbol
has been started.
3. Once this time has elapsed, the indicator light «h»
11 - 20
2. Select the wash program, press the START/PAUSE
repeatedly until the selected delayed start indicator light
Drying
appears on the display; each time you press the button,
switches off and the wash cycle begins.
The start time of the program may be delayed for a period
normally soiled items, use approximately either 35g (powder
Water Hardness Table
«h» switches off.
button and within 4 seconds close the door: the timer
1
Program
To adjust the delay time and select a shorter period of time,
the time (1h, 2h, etc. up to max. 12h) from the start of
of time between 1 and 12 hours.
21 - 30
phase
The DELAY function cannot be set once a wash cycle
will begin counting down.
detergent) or 35ml (liquid detergent) and additional tea spoon of
Program
the selected wash cycle will be increased.
press the DELAY button. To cancel it, press the button
°dH
2
1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h»
has been started.
detergent directly inside the tub. If tablets are used, one tablet
2. Select the wash program, press the START/PAUSE
31 - 60
repeatedly until the selected delayed start indicator light
appears on the display; each time you press the button,
German degrees
switches off and the wash cycle begins.
«h» switches off.
button and within 4 seconds close the door: the timer
will be enough.
Program
3
Average
the time (1h, 2h, etc. up to max. 12h) from the start of
To adjust the delay time and select a shorter period of time,
61 - 90
0 - 6
The DELAY function cannot be set once a wash cycle
will begin counting down.
50°
50°
Program
50°
50°
50°
50°
50°
Eco
If the crockery is only lightly soiled or if it has been rinsed with
the selected wash cycle will be increased.
50°
50°
press the DELAY button. To cancel it, press the button
Eco
50°
50°
1
4
has been started.
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
repeatedly until the selected delayed start indicator light
water before being placed in the dishwasher, reduce the amount
7 - 11
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
«h» switches off.
5
Very hard
Program
Conventional
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
To adjust the delay time and select a shorter period of time,
Conventional
55°
2
will begin counting down.
12 - 17
The DELAY function cannot be set once a wash cycle
Eco
55°
55°
Program
55°
50°
50°
1
Eco
55°
55°
55°
50°
55°
wash and dry
55°
55°
press the DELAY button. To cancel it, press the button
powder/gel putted inside the tub.
3. Once this time has elapsed, the indicator light «h»
has been started.
wash and dry
55°
repeatedly until the selected delayed start indicator light
• Switch off the appliance by pressing the ON/OFF button.
18 - 34
switches off and the wash cycle begins.
«h» switches off.
Conventional
Intensive
65°
3
Setting is complete!
Conventional
To adjust the delay time and select a shorter period of time,
2
55°
35 - 50
The DELAY function cannot be set once a wash cycle
wash and dry
65°
65°
-
-
Eco
65°
Program
50°
55°
-
50°
55°
Eco
65°
65°
-
-
1
65°
65°
-
50°
Intensive
press the DELAY button. To cancel it, press the button
65°
65°
wash and dry
has been started.
repeatedly until the selected delayed start indicator light
Fast
50°
4
65°
FILLING THE RINSE AID DISPENSER
Intensive
65°
3
«h» switches off.
Conventional
Conventional
55°
2
The DELAY function cannot be set once a wash cycle
-
-
-
-
-
50°
50°
50°
-
-
-
-
Intensive
wash and dry
Program
50°
50°
65°
55°
-
-
-
65°
55°
Eco
50°
50°
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
-
-
50°
Fast
1
50°
50°
B
wash and dry
has been started.
Sanitizing
65°
5
should be filled when the RINSE AID REFILL indicator light
Fast
50°
4
3
Intensive
65°
Conventional
-
A
50°
in the control panel is lit.
55°
2
-
65°
65°
65°
-
-
-
Fast
65°
Program
65°
50°
-
-
50°
wash and dry
65°
50°
-
Intensive
1
Eco
65°
65°
50°
65°
Sanitizing
65°
65°
6
Pre-Wash
-
5
Sanitizing
65°
Fast
50°
4
Intensive
65°
3
Conventional
2
Self-Clean
55°
65°
7
-
-
-
-
-
-
-
Sanitizing
-
65°
-
-
-
-
-
65°
wash and dry
Pre-Wash
Program
-
-
-
65°
-
-
-
-
Fast
6
Eco
55°
50°
-
50°
Pre-Wash
1
-
-
-
50°
Sanitizing
65°
5
Fast
50°
4
Intensive
65°
3
Conventional
Self-Clean
65°
7
1.
55°
When measuring out the detergent refer to the mentioned ear-
2
-
-
A
65°
65°
-
-
-
65°
-
-
-
-
Pre-Wash
65°
65°
-
-
-
-
Sanitizing
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
wash and dry
65°
65°
-
-
65°
Self-Clean
1
Eco
Pre-Wash
65°
65°
65°
-
50°
65°
-
6
-
lier information to add the proper quantity. Inside the dispenser
Sanitizing
-
65°
5
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Fast
50°
4
B there are indications to help the detergent dosing.
address: [email protected]
3
Intensive
65°
Conventional
Self-Clean
55°
65°
2
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
-
2.
Remove detergent residues from the edges of the dispenser
Self-Clean
Pre-treatment of the dishes is not needed before any of the programs.
65°
-
-
65°
Pre-Wash
wash and dry
-
50°
6
Pre-Wash
-
5
Sanitizing
65°
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
and close the cover until it clicks.
Fast
-
50°
4
1. Open the dispenser B by pressing and pulling up the tab on
65°
address: [email protected]
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Intensive
65°
3
3. Close the lid of the detergent dispenser by pulling it up until
Self-Clean
65°
7
the lid.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
-
Self-Clean
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
65°
65°
65°
Pre-Wash
-
6
the closing device is secured in place.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
2. Carefully introduce the rinse aid as far as the maximum
Sanitizing
65°
5
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
B
Fast
50°
4
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
address: [email protected]
(110 ml) reference notch of the filling space - avoid spilling it.
The detergent dispenser automatically opens up at the right time
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Self-Clean
65°
7
Pre-treatment of the dishes is not needed before any of the programs.
If this happens, clean the spill immediately with a dry cloth.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
-
-
according to the program. If all-in-one detergents are used, we
Pre-Wash
-
6
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
*) Not all options can be used simultaneously.
5
Sanitizing
65°
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
3. Press the lid down until you hear a click to close it.
recommend using the TABLET button, because it adjusts the
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: [email protected]
NEVER pour the rinse aid directly into the tub.
program so that the best washing and drying results are always
7
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Self-Clean
65°
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
-
65°
Pre-Wash
-
6
PROGRAMS DESCRIPTION
achieved.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: [email protected]
Self-Clean
65°
7
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: [email protected]
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: [email protected]
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
three times - a beep will be heard.
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satisfied with the drying results, you can
adjust the quantity of rinse aid used.
to select the level of rinse aid quantity to be
NaturalDry
• Switch the dishwasher on using the ON/OFF button.
Door opening system NaturalDry is a convection drying system
• Switch it off using the ON/OFF button.
• Press button
which automatically opens the door during/after drying phase to
• Switch it on using the ON/OFF button.
ensure exceptional drying performance every day. Door opens at
•
The current selection level number and rinse aid indicator light flash.
the temperature that is safe to your kitchen furniture.
•
Press button
NaturalDry
NaturalDry
NaturalDry
NaturalDry
NaturalDry
NaturalDry
NaturalDry
NaturalDry
As additional steam protection, special designed protection foil is
supplied.
s.
Conventional wash and dry 55°
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
added together with the dishwasher. To see how to mount protec-
Door opening system NaturalDry is a convection drying system
• Switch it off using the ON/OFF button.
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
Setting is complete!
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
NaturalDry
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
NaturalDry functionality could be disabled by the user as follows:
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
supplied. The LOW RINSE AID indicator light will not be lit if you
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
1. Go to the Dishwasher software menu pressing and holding
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
NaturalDry
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
NaturalDry
NaturalDry
ensure exceptional drying performance every day. Door opens at
run out of rinse aid. A maximum of 5 levels can be set according to
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
Door opening system NaturalDry is a convection drying system
added together with the dishwasher. To see how to mount protec-
button (6 sec).
added together with the dishwasher. To see how to mount protec-
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture.
the dishwasher model. The factory setting is specific to the model,
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
which automatically opens the door during/after drying phase to
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
2. You switched to NaturalDry Control Menu, you could change
ensure exceptional drying performance every day. Door opens at
NaturalDry
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
please follow instruction above to check this for your machine.
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
the temperature that is safe to your kitchen furniture.
status of NaturalDry functionality by pressing
ensure exceptional drying performance every day. Door opens at
Door opening system NaturalDry is a convection drying system
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
• If you see bluish streaks on the dishes, set a low number (1-2).
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
the temperature that is safe to your kitchen furniture.
E
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
button (6 sec).
– enabled
button (6 sec).
• If there are drops of water or limescale marks on the dishes,
button (6 sec).
button (6 sec).
button (6 sec).
added together with the dishwasher. To see how to mount protec-
button (6 sec).
button (6 sec).
ensure exceptional drying performance every day. Door opens at
NaturalDry
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
:
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
tion foil please refer to (INSTALLATION GUIDE).
2. You switched to NaturalDry Control Menu, you could change
for 5 seconds, until you hear a beep.
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
set a high number (3-4).
NaturalDry
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
Door opening system NaturalDry is a convection drying system
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
Door opening system NaturalDry is a convection drying system
press and hold
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
E
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
d
E
E
added together with the dishwasher. To see how to mount protec-
d
d
E
E
button (6 sec).
d
d
button (6 sec).
E
– enabled
– enabled
– enabled
d
– enabled
– enabled
E
E
– enabled
– enabled
ensure exceptional drying performance every day. Door opens at
button (6 sec).
which automatically opens the door during/after drying phase to
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change
FILLING THE DETERGENT DISPENSER
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows:
ensure exceptional drying performance every day. Door opens at
Door opening system NaturalDry is a convection drying system
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
press and hold
press and hold
button (3 sec).
button (3 sec).
press and hold
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
button (3 sec).
press and hold
press and hold
button (3 sec).
button (3 sec).
press and hold
button (3 sec).
to select the desired hardness level (see
press and hold
press and hold
1. Go to the Dishwasher software menu pressing and holding
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
which automatically opens the door during/after drying phase to
the temperature that is safe to your kitchen furniture.
E
E
added together with the dishwasher. To see how to mount protec-
– enabled
E
button (6 sec).
button (6 sec).
– enabled
button (6 sec).
ensure exceptional drying performance every day. Door opens at
dishwashers.
NaturalDry
As additional steam protection, special designed protection foil is
To confirm the change and exit from the Control Menu please
tion foil please refer to (INSTALLATION GUIDE).
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
press and hold
NaturalDry functionality could be disabled by the user as follows:
To achieve the best washing and drying results, the combined
Door opening system NaturalDry is a convection drying system
added together with the dishwasher. To see how to mount protec-
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
Water Hardness Table
press and hold
press and hold
1. Go to the Dishwasher software menu pressing and holding
which automatically opens the door during/after drying phase to
E
– enabled
useof detergent, rinse aid liquid and refined salt is required.
tion foil please refer to (INSTALLATION GUIDE).
added together with the dishwasher. To see how to mount protec-
E
E
– enabled
button (6 sec).
ensure exceptional drying performance every day. Door opens at
To confirm the change and exit from the Control Menu please
°dH
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
NaturalDry functionality could be disabled by the user as follows:
We recommend using detergents that do not contain phosphates
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
Duration of
Duration of
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
Duration of
Duration of
Duration of
Duration of
Available
press and hold
Duration of
NaturalDry functionality could be disabled by the user as follows:
German degrees
Door opening system NaturalDry is a convection drying system
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
or chlorine, as these products are harmful to the environment.
As additional steam protection, special designed protection foil is
press and hold
press and hold
Available
Available
wash pro-
wash pro-
Natural
Available
Available
1. Go to the Dishwasher software menu pressing and holding
wash pro-
Available
Available
Available
wash pro-
wash pro-
wash pro-
which automatically opens the door during/after drying phase to
Available
E
Available
– enabled
options
added together with the dishwasher. To see how to mount protec-
Soft
button (6 sec).
0 - 6
*)
Good washing results also depend on the correct amount of
button (6 sec).
ensure exceptional drying performance every day. Door opens at
options
options
NaturalDry
gram
gram
options
*)
*)
Available
To confirm the change and exit from the Control Menu please
gram
Dry
options
options
options
functions *)
*)
gram
gram
gram
*)
*)
tion foil please refer to (INSTALLATION GUIDE).
options
*)
options
*)
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
detergent being used.
the temperature that is safe to your kitchen furniture.
Duration of
°fH
Medium
press and hold
7 - 11
options
NaturalDry functionality could be disabled by the user as follows:
Door opening system NaturalDry is a convection drying system
*)
(h:min)
(h:min)
(h:min)
(h:min)
(h:min)
(h:min)
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
As additional steam protection, special designed protection foil is
French degrees
Available
1. Go to the Dishwasher software menu pressing and holding
Available
which automatically opens the door during/after drying phase to
Exceeding the stated amount does not result in a more effective
E
– enabled
added together with the dishwasher. To see how to mount protec-
E
12 - 17
– enabled
button (6 sec).
ensure exceptional drying performance every day. Door opens at
Available
options
wash and increases environmental pollution.
To confirm the change and exit from the Control Menu please
options
0 - 10
tion foil please refer to (INSTALLATION GUIDE).
*)
2:45
2:45
2:45
2:45
2:45
2. You switched to NaturalDry Control Menu, you could change
2:45
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
Duration of
options
press and hold
*)
Hard
18 - 34
NaturalDry functionality could be disabled by the user as follows:
The amount can be adjusted to the soil level. In the case of
status of NaturalDry functionality by pressing
As additional steam protection, special designed protection foil is
press and hold
11 - 20
1. Go to the Dishwasher software menu pressing and holding
Available
Available
E
– enabled
normally soiled items, use approximately either 35g (powder
added together with the dishwasher. To see how to mount protec-
35 - 50
button (6 sec).
Available
To confirm the change and exit from the Control Menu please
options
options
21 - 30
tion foil please refer to (INSTALLATION GUIDE).
*)
2:00
2:00
detergent) or 35ml (liquid detergent) and additional tea spoon of
2:00
2:00
2:00
2. You switched to NaturalDry Control Menu, you could change
2:00
options
press and hold
*)
NaturalDry functionality could be disabled by the user as follows:
status of NaturalDry functionality by pressing
detergent directly inside the tub. If tablets are used, one tablet
31 - 60
1. Go to the Dishwasher software menu pressing and holding
E
– enabled
-
will be enough.
button (6 sec).
Available
To confirm the change and exit from the Control Menu please
61 - 90
To open the detergent dispenser
2:30
2:30
2:30
2. You switched to NaturalDry Control Menu, you could change
2:30
2:30
2:30
-
-
If the crockery is only lightly soiled or if it has been rinsed with
Duration of
options
press and hold
*)
press button A.
status of NaturalDry functionality by pressing
-
water before being placed in the dishwasher, reduce the amount
-
-
Available
E
– enabled
-
Introduce the detergent into
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
Available
To confirm the change and exit from the Control Menu please
options
*)
0:55
0:55
0:55
-
-
-
0:55
0:55
-
0:55
-
-
the dry dispenser B only.
options
press and hold
*)
powder/gel putted inside the tub.
-
-
-
Place the amount of detergent
-
-
Available
-
for pre-washing directly inside
1:40
1:40
1:40
-
-
1:40
1:40
1:40
-
-
-
-
-
-
-
options
*)
-
the tub.
-
-
-
Available
-
-
0:10
0:10
-
-
-
0:10
-
-
-
0:10
0:10
0:10
-
-
-
-
-
-
-
options
*)
-
B
-
-
-
-
-
A
0:50
0:50
-
0:50
-
-
-
0:50
0:50
0:50
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
B
-
-
-
-
3. INTENSIVE - Program recommended for heavily soiled
-
-
-
1.
When measuring out the detergent refer to the mentioned ear-
-
-
-
crockery, especially suitable for pans and saucepans (not to
-
A
-
-
-
lier information to add the proper quantity. Inside the dispenser
-
be used for delicate items).
-
B there are indications to help the detergent dosing.
-
-
4. FAST WASH - Program for limited quantity of normally soiled
-
-
-
2.
Remove detergent residues from the edges of the dispenser
-
crockery. Ensures optimal cleaning performance in shorter
and close the cover until it clicks.
time.
3. Close the lid of the detergent dispenser by pulling it up until
-
-
-
-
-
5. SANITIZING - Normally or heavily soiled crockery, with
the closing device is secured in place.
additional antibacterial wash. Can be used to perform
The detergent dispenser automatically opens up at the right time
-
-
maintenance of the dishwasher.
according to the program. If all-in-one detergents are used, we
6. PRE-WASH - Use to refresh crockery planned to be washed
recommend using the TABLET button, because it adjusts the
later. No detergent to be used with this program.
program so that the best washing and drying results are always
7. SELF-CLEAN - Program to be used to perform maintenance
achieved.
of the dishwasher, to be carried out only when the
dishwasher is EMPTY using specific detergents designed for
dishwasher maintenance.
FUNCTIONS can be selected directly by pressing the
corresponding button (see CONTROL PANEL).
If a function is not compatible with the selected program
see PROGRAMS TABLE, the corresponding LED rapidly 3
times and beeps will sound. The option will not be enabled.
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satisfied with the drying resul
adjust the quantity of rinse aid used.
• Switch the dishwasher on using the ON/OFF button
• Switch it off using the ON/OFF button.
• Press button
• Switch it on using the ON/OFF button.
•
The current selection level number and rinse aid indicato
•
Press button
three times - a beep will be heard.
s.
supplied.
• Switch it off using the ON/OFF button.
Eco 50°
Setting is complete!
to select the level of rinse aid quantity to be
If the rinse aid level is set to ZERO (ECO), no rinse aid
supplied. The LOW RINSE AID indicator light will not b
run out of rinse aid. A maximum of 5 levels can be set a
Intensive 65°
the dishwasher model. The factory setting is specific to
Fast wash 50°
please follow instruction above to check this for your ma
• If you see bluish streaks on the dishes, set a low num
Sanitizing 65°
• If there are drops of water or limescale marks on the
set a high number (3-4).
Pre-wash
d
– disabled
Self-Clean 65°
FILLING THE DETERGENT DISPENSER
� � � � � � � � � � � � � � � � � � � � � � � �
button:
button:
button:
button:
button:
button:
button (3 sec).
dishwashers.
– disabled
– disabled
– disabled
– disabled
– disabled
d
d
– disabled
– enabled
– disabled
– disabled
To achieve the best washing and drying results, the co
useof detergent, rinse aid liquid and refined salt is requ
button:
button (3 sec).
button (3 sec).
d
d
– disabled
d
– enabled
– disabled
– disabled
We recommend using detergents that do not contain p
or chlorine, as these products are harmful to the enviro
button (3 sec).
button:
button (3 sec).
button (3 sec).
Good washing results also depend on the correct amou
d
– disabled
Duration of
d
d
– enabled
– disabled
– disabled
detergent being used.
°fH
button (3 sec).
wash pro-
Duration of
French degrees
Water
Water
Water
Exceeding the stated amount does not result in a more
Water
Water
Water
button:
Water
consumption
button (3 sec).
button (3 sec).
Duration of
Water
wash pro-
Duration of
d
wash pro-
– disabled
gram
wash and increases environmental pollution.
0 - 10
consumption
consumption
consumption
consumption
consumption
consumption
consumption
consumption
consumption
consumption
consumption
Water
consumption
consumption
consumption
(litres/cycle)
wash pro-
wash program
consumption
gram
gram
*)
The amount can be adjusted to the soil level. In the cas
(litres/cycle)
(litres/cycle)
consumption
consumption
(kWh/cycle)
(kWh/cycle)
(litres/cycle)
(kWh/cycle)
Duration of
(litres/cycle)
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
(h:min)
(litres/cycle)
(kWh/cycle)
(litres/cycle)
(litres/cycle)
button (3 sec).
11 - 20
**)
gram
**)
**)
Water
**)
(h:min)**)
(litres/cycle)
**)
**)
button:
(h:min)
**)
(h:min)
(litres/cycle)
(kWh/cycle)
**)
**)
normally soiled items, use approximately either 35g (po
wash pro-
Duration of
wash pro-
(h:min)
**)
d
– disabled
d
Water
21 - 30
consumption
consumption
– disabled
detergent) or 35ml (liquid detergent) and additional tea
wash pro-
gram
gram
*)
12.0
12.0
consumption
12.0
consumption
2:45
12.0
12.0
12.0
2:45
2:45
12.0
2:45
2:45
(litres/cycle)
12.0
(litres/cycle)
Duration of
gram
detergent directly inside the tub. If tablets are used, on
button (3 sec).
31 - 60
(h:min)
(h:min)
(litres/cycle)
(kWh/cycle)
**)
Water
**)
button:
button (3 sec).
(h:min)
**)
will be enough.
wash pro-
wash pro-
Duration of
d
– disabled
61 - 90
Water
consumption
consumption
wash pro-
If the crockery is only lightly soiled or if it has been rins
gram
2:00
gram
15.0
*)
15.0
15.0
2:45
2:45
consumption
15.0
12.0
consumption
2:45
2:00
15.0
15.0
12.0
15.0
2:00
2:00
15.0
(litres/cycle)
(litres/cycle)
button (3 sec).
gram
water before being placed in the dishwasher, reduce th
2:00
(h:min)
(h:min)
**)
(litres/cycle)
**)
button:
(kWh/cycle)
(h:min)
**)
Duration of
d
of detergent used accordingly (minimum 25 g/ml) e.g. s
– disabled
Water
2:30
15.0
wash pro-
2:00
15.0
powder/gel putted inside the tub.
15.0
15.0
2:45
2:00
2:00
consumption
2:45
15.0
12.0
15.0
consumption
15.0
15.0
2:45
2:30
15.0
12.0
2:30
2:30
15.0
gram
button (3 sec).
(litres/cycle)
Water
button:
(kWh/cycle)
(h:min)
0:55
**)
11.5
wash pro-
Duration of
2:30
d
– disabled
2:30
15.0
Water
consumption
wash pro-
2:00
15.0
gram
11.5
11.5
11.5
2:00
2:30
consumption
2:00
2:30
11.5
11.5
15.0
15.0
consumption
0:55
11.5
0:55
2:45
0:55
12.0
11.5
(litres/cycle)
gram
button (3 sec).
(h:min)
1:40
11.5
(litres/cycle)
(kWh/cycle)
**)
0:55
11.5
(h:min)
**)
Duration of
2:30
15.0
Water
0:55
wash pro-
2:00
15.0
11.5
11.5
11.5
0:55
consumption
0:55
11.5
11.5
11.5
To open the detergent dispenser
B
consumption
2:45
11.5
12.0
2:30
2:45
1:40
2:30
12.0
15.0
1:40
1:40
11.5
0:10
4.5
gram
1:40
11.5
(litres/cycle)
(kWh/cycle)
press button A.
0:55
11.5
(h:min)
Duration of
**)
A
2:30
15.0
Water
wash pro-
Introduce the detergent into
2:00
0:50
15.0
8.0
4.5
4.5
1:40
1:40
4.5
11.5
0:10
1:40
consumption
4.5
4.5
4.5
4.5
consumption
0:55
2:00
0:55
11.5
15.0
0:10
2:45
0:10
0:10
12.0
4.5
gram
the dry dispenser B only.
1:40
11.5
(litres/cycle)
(kWh/cycle)
0:55
11.5
(h:min)
**)
2:30
15.0
Place the amount of detergent
0:50
8.0
2:00
15.0
8.0
8.0
8.0
0:10
0:10
8.0
8.0
8.0
4.5
1:40
1:40
11.5
2:30
0:50
2:45
0:10
0:50
0:50
12.0
4.5
15.0
for pre-washing directly inside
8.0
1:40
0:10
11.5
the tub.
0:55
11.5
2:30
15.0
1.
When measuring out the detergent refer to the men
A
2:00
0:50
15.0
8.0
0:50
0:50
8.0
0:10
0:10
4.5
0:55
11.5
0:10
4.5
lier information to add the proper quantity. Inside the
1:40
11.5
B there are indications to help the detergent dosing
0:55
11.5
0:50
2:30
15.0
2.
Remove detergent residues from the edges of the d
0:50
8.0
0:50
0:50
8.0
1:40
11.5
0:10
4.5
and close the cover until it clicks.
1:40
11.5
0:55
11.5
3. Close the lid of the detergent dispenser by pulling it
0:50
8.0
the closing device is secured in place.
0:10
4.5
0:10
4.5
1:40
11.5
The detergent dispenser automatically opens up at the
0:50
8.0
according to the program. If all-in-one detergents are u
0:50
8.0
0:10
4.5
recommend using the TABLET button, because it adju
program so that the best washing and drying results a
0:50
8.0
achieved.
8
11
9
9
9
9
9
9
9
9
three times - a beep will be heard.
9
9
to select the level of rinse aid quanti
DOOR OPENING
9
9
9
after 150 min
end of cycle
9
9
end of cycle
9
N/A
N/A
9
N/A
button:
9
N/A
9
button:
button:
button:
button:
9
button:
button:
Water
Energy
Energy
Energy
Energy
Energy
Energy
Energy
Water
Energy
Energy
consumption
Energy
Energy
consumption
consumption
(kWh/cycle)
consumption
(kWh/cycle)
(kWh/cycle)
Water
Energy
Energy
(kWh/cycle)
button:
Energy
consumption
consumption
0.92
0.92
0.92
0.92
0.92
12.0
0.92
0.92
12.0
0.92
0.92
12.0
0.92
(kWh/cycle)
(kWh/cycle)
0.92
Water
Energy
Energy
Energy
consumption
consumption
1.35
1.35
1.35
12.0
1.35
0.92
0.92
15.0
0.92
1.35
1.35
1.35
1.35
15.0
1.35
1.35
(kWh/cycle)
(kWh/cycle)
15.0
1.35
Energy
1.50
1.35
1.50
1.50
15.0
12.0
1.50
0.92
1.35
0.92
1.35
1.50
1.50
15.0
0.92
1.50
1.50
15.0
1.50
1.50
Energy
1.10
15.0
1.50
1.50
Energy
consumption
To open the detergent
1.35
1.10
1.10
1.10
15.0
15.0
1.10
1.10
1.35
1.50
1.35
1.50
11.5
1.10
1.10
11.5
0.92
1.10
1.10
(kWh/cycle)
press button A.
1.30
1.10
Introduce the deterge
1.50
Energy
11.5
1.10
1.35
the dry dispenser B o
1.30
1.30
1.30
11.5
1.30
1.30
1.10
1.10
1.30
0.92
11.5
15.0
0.92
1.50
1.50
1.30
11.5
1.30
1.30
0.01
1.30
Place the amount of
1.10
1.50
Energy
for pre-washing direc
1.35
0.80
0.01
0.01
11.5
0.01
1.30
1.30
0.01
0.01
0.01
0.01
11.5
1.30
11.5
1.35
1.10
1.10
4.5
0.92
4.5
0.01
0.01
0.01
the tub.
1.30
1.10
1.50
0.80
1.35
0.80
0.80
0.80
4.5
0.80
0.80
0.80
0.01
0.01
11.5
1.30
1.30
8.0
0.92
0.01
8.0
1.50
0.80
0.80
0.80
1.30
4.5
0.01
1.10
1.50
1.35
0.80
8.0
0.80
0.80
4.5
0.01
0.01
1.10
0.01
1.30
1.10
8.0
0.80
1.50
0.80
8.0
0.80
0.80
1.30
0.01
1.30
1.10
0.80
0.01
0.01
1.30
0.80
0.80
0.01
0.80