Avantco KEGERATRB Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur Avantco KEGERATRB. Avantco KEGERATRB 13 halaman. Beer keg dispenser

User Manual

Installing the Guardrail

Follow the steps below to install the guardrail.

1. Place the guardrail on top of the cabinet.

2. Align all support feet of the guardrail with the holes on top of the unit.

Installing the CO2 Cylinder

Follow these steps to safely install the CO2 regulator and CO2 cylinder. You must read and

understand the following procedures for the CO2 cylinders before installation.

NOTE: Your CO2 cylinder has DOT (USA Department of Transportation) approval, however the

cylinder has been shipped empty to avoid any possible accidents during transportation. When you

purchase the first keg of beer, you must also have your CO2 cylinder filled at your local supplier.

1. Install the CO2 gas line tube to the regulator

by attaching one end of the tube to the hose

barb connection on the CO2 regulator. (See

Illustration B, on page 8)

2. Insert the special washer (provided with the

kit) into the regulator to cylinder attachment

nut. (See Illustration A, on page 8)

3. Attach the CO2 regulator to the CO2

cylinder by screwing the regulator nut onto

the cylinder valve and tightening with an

adjustable wrench.

4. Wrap the rubber strap that is attached to the

interior of Beer Keg Dispenser unit around the

CO2 bottle to secure the bottle in place (as

shown to the right).

5. Position the cylinder so that you are able to

read the numbers on the gauges and have

easy access to shut-off valves.

CO2 can be dangerous! CO2 cylinders contain high-pressured gas, which can be

hazardous if handled improperly. They must be handled with care.

DANGER!

- 8 -