HIKVISION DS-7104HQHI-F1/N Panduan Memulai Cepat - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk DVR HIKVISION DS-7104HQHI-F1/N. HIKVISION DS-7104HQHI-F1/N 17 halaman. T710xqxtx series. turbohd dvr/camera kit
Halaman Cetak
1 2
S E T U P R E C O R D I N G ( c o n t i n u e d )
Motion Detection Areas
To define the image areas that Motion Detection will monitor for each camera, do the following:
1.
Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.
Use Camera pull-down menu to select camera to configure.
2.
3.
Check the Enable Motion Detection checkbox to enable motion detection.
Use the Sensitivity boxes to select how responsive the detection should be (the more green
4.
boxes lit, the greater the sensitivity).
5.
Drag a grid(s) over the area(s) on the image that will be sensitive to motion.
Click the Settings Set button to configure Arming Schedule (when detection is enabled) and
6.
Linkage Actions (what action(s) to take when motion is detected).
Record Quality
•
Main Stream
1.
Go to RECORDING CONFIGURATION > RECORD QUALITY > MAIN STREAM and set
the following items:
- Stream Type enables/disables audio streaming from the cameras (if the camera does
not have audio capabilities, Stream Type will have only Video option).
- Resolution sets recording resolution.
- Bitrate Type:
> Variable saves HDD space
> Constant provides more stable stream
CAMERA
Select camera
ENABLE MOTION DETECTION
Click to enable/disable
MOTION GRID
Draw grid area that will detect
motion
SENSITIVITY
Select
set sensitivity (in example,
sensitivity is set to 3)
SETTINGS/SET
Configure arming schedule and
linkage actions
APPLY
Click to apply settings
number of green squares to