Avantco UDD1S Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur Avantco UDD1S. Avantco UDD1S 17 halaman.
Halaman Cetak
Knockout CO
These is the recommended procedure for
installing a remote CO
1 . Remove black knockout plug with pliers . (See images below for plug locations)
2 . Use drill with 1/2" bit to bore a whole straight back through wall into compressor compartment .
3 . Snake CO
line through hole, down and around, exiting behind rear caster underneath grill .
2
4 . Seal hole around CO
*Depending on setup and amount of kegs, a CO
NOTE: In models UDD1 & UDD1S, the CO
tank (up to 5 lbs . in size) can be placed inside
the cooler to maintain complete mobility
CAUTION
CO
tanks are potentially dangerous because of the pressure
2
they contain . If you are unfamiliar with their use or the use of
a CO
regulator, seek information from your local distributor,
2
or beverage man before proceeding .
Installation
2
container in your Avantco unit .
2
line with silicone sealer to prevent cold air leakage .
2
2
User Manual
Tools:
-
-
-
-
manifold may be needed .
2
- 9 -
Pliers
Power Drill
Silicone Sealer
1/2" Drill Bit