IKEA VALGJORD Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring IKEA VALGJORD. IKEA VALGJORD 28 halaman.
Juga untuk IKEA VALGJORD: Panduan Pengguna (28 halaman)

Halaman Cetak

ENGLISH

How to activate ExtraHygiene

Press

, the related indicator comes on.

If the option is not applicable to the

selected programme, the indicator stays off.

The display shows the updated programme

duration.

Settings

Programme selection mode and user

mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings can

be changed:

• The activation or the deactivation of the

acoustic signal for end of programme.

• The activation or deactivation of the

rinse aid empty notification.

• The level of rinse aid according to the

required dosage.

These settings will be saved until you

change them again.

How to set the programme selection mode

The appliance is in programme selection

mode when the display shows the

programme number P4.

When you activate the appliance, usually it

is in programme selection mode. However,

if this does not happen, you can set the

programme selection mode in the following

way:

Press and hold RESET until the appliance is

in programme selection mode.

The rinse aid dispenser

The rinse aid helps to dry the dishes without

streaks and stains.

The ExtraHygiene option is not applicable

for programme number:

• P5 (Glass)

• P6 (Rinse & Hold)

We recommend to always use rinse aid for

best drying performance.

The rinse aid is automatically released

during the hot rinse phase.

You can set the released quantity of rinse

aid between level 1 (minimum quantity) and

level 6 (maximum quantity). Level 0 will

deactivate the rinse aid dispenser and no

rinse aid will be released.

Factory setting: level 4.

How to set the rinse aid level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously

the indicators

to flash and the display is blank.

2. Press

• The indicators

• The indicator

flash.

• The display shows the current setting:

e.g.

= level 4.

– The levels of rinse aid are from

0A to 6A.

– Level 0 = no rinse aid is released.

3. Press

again and again to change

the setting.

4. Press the on/off button to confirm the

setting.

and

until

and

go off.

continues to

start