GAPOSA XQ50 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Mesin GAPOSA XQ50. GAPOSA XQ50 16 halaman. Tubular motors with mechanical limit switch and integrated receiver.
Juga untuk GAPOSA XQ50: Petunjuk Manual (8 halaman), Petunjuk (4 halaman), Panduan Cepat Pemrograman (7 halaman), Manual (15 halaman), Petunjuk Manual (13 halaman), Manual (13 halaman), Petunjuk Manual (8 halaman)

Halaman Cetak

ELECTRICAL CONNECTION

Check that the mains voltage available on the system is as shown

on the label. The motor mains connection should be executed according

to the diagram on the next page, by qualified technicians able to operate in

compliance with the rules.

ATTENTION: The power supply must contemplate a switching device

with an opening distance between contacts of at least 3mm.

The motors connecting cables to the network can only be replaced with

cables of the same type provided by the motor manufacturer.

• D o not connect more than one tubular motor to a single switch.

• D o not set the shutter/awning into motion while you are cleaning or

servicing the device and disconnect the supply.

• T he switch controlling the motor must be installed in full view, not higher

than 1,5m and it must be kept far from moving parts.

4x0.75 mm

Neutral

Ground

Direction of rotation 1 Brown

Direction of rotation 2 Black

Blue

Yellow/Green

1/2

Neutral

Ground

Phase

Push button

230 V~ / 50 Hz

Power supply