GAPOSA XQ60 Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Mesin GAPOSA XQ60. GAPOSA XQ60 15 halaman. Tubular motors with mechanical limit switch and integrated receiver.
Juga untuk GAPOSA XQ60: Petunjuk Manual (8 halaman), Petunjuk (4 halaman), Petunjuk Manual (13 halaman), Manual (13 halaman), Manual (16 halaman), Petunjuk Manual (8 halaman)

Halaman Cetak

INSTALLATION

The fixing bracket

frame so that the roller tube

height not less than 1,8m.

[FOR XQ50] Place the motor square pin

the cap at the opposite end of the tube on the fixing plate.

WARNING: Never hit on the head of the motor (D) when you

insert it into the tube.

NOTES

• For the XQ50, with torque up to 15Nm, the minimum tube diameter

is 50x1,5mm; for motors with higher torques, the minimum tube

diameter is 60x1,5mm.

• For the XQ60, the minimum tube diameter is 63x1,5mm.

WARNING:

• The screws used to fix the last slat on the tube may be too long

and reach the tubular part of the motor. Use appropriate screws or

fixing clips.

• Motor moving parts installed under 2,5m from the ground must be

protected.

• A wrong motor installation can damage persons or objects.

must be fixed inside the box or on the awning

9 0 °

is perfectly horizontal and at a

on the bracket

2/2

and