GAPOSA XQ60 Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Mesin GAPOSA XQ60. GAPOSA XQ60 13 halaman. Tubular motors with mechanical limit switch and integrated receiver.
Juga untuk GAPOSA XQ60: Petunjuk Manual (8 halaman), Petunjuk (4 halaman), Manual (15 halaman), Petunjuk Manual (13 halaman), Manual (16 halaman), Petunjuk Manual (8 halaman)

Halaman Cetak
GAPOSA XQ60 Manual
PROGRAMMING

PROGRAMMING TRANSMITTER

CAUTION: If more motors with receiver have to be installed, it is important to
power up only one motor at time during the first programming session,
in order to avoid any interferences with others.
Power up the motor to be
1
programmed.
Press and hold the PROG-TX
2
button until the motor starts
moving.
Check the rotation of the motor,
3
then release PROG-TX (the motor
stops).
Within 5 seconds press the
corresponding button (i.e. UP
if the motor rotates upwards
4
or DOWN if vice versa).
The transmitter has been
programmed and the rotation of
the motor has been synchronized.
1/4
OFF
ON