GAPOSA XQ50 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Tirai Jendela GAPOSA XQ50. GAPOSA XQ50 13 halaman. Tubular motors with mechanical limit switch and integrated receiver.
Juga untuk GAPOSA XQ50: Petunjuk Manual (8 halaman), Petunjuk (4 halaman), Panduan Cepat Pemrograman (7 halaman), Manual (15 halaman), Petunjuk Manual (13 halaman), Manual (16 halaman), Petunjuk Manual (8 halaman)

Halaman Cetak

SETTING THE LIMITS

SWITCHES

Motors are supplied with pre-set limit switches, in order to allow two

turns in both directions.

IMPORTANT: Limit-switches setting procedures shown are valid

for right and left side installation.

IMPORTANT: The procedure shown is valid for shutters installed

in internal boxes and for awnings with rear-motor winding.

In case shutters are in an external box or awnings wind front-

motor, the setting-screws must be read reversed (ex.: up as

down and vice versa).

NOTES:

• A rrows

adjusting screw.

• A rrows

decreasing

indicate the direction of rotation controlled by each

indicate the screw direction for increasing

revolutions controlled by the limit-switches.

1/2