GAPOSA Roll app Panduan Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Cepat untuk Kontrol Jarak Jauh GAPOSA Roll app. GAPOSA Roll app 6 halaman.
Halaman Cetak
Before installing RollApp, read this installation and the safety instruction carefully. The installation and implementation of this product must be carried
out by a motorization and home automation professional, in accordance with the GAPOSA instructions and the regulations applicable in the country of
commissioning.
The installer must inform his customers of the conditions of use and maintenance of the product. Any use outside the scope of application defined by
GAPOSA is prohibited. As with any breach of the instructions in this manual, it would result in the exclusion of liability and warranty claims under GA-
POSA. Before installation, check the compatibility of this product with the associated equipment and accessories. Please read these warnings carefully,
they supplement the product manuals before using RollApp home automation solutions. Please also notify all other RollApp users of the following.
GAPOSA cannot be held responsible for any harmful consequences that could occur if the user has not taken into account the instructions given in the
product manual, in the safety instructions and warnings below. For information, advice and complaints regarding the use of RollApp home automation
solutions, please contact a GAPOSA representative (www.gaposa.com) or refer to the applicable sales literature.
GAPOSA Srl has developed RollApp to control GAPOSA radio products, including motors for shutters and blinds as well as receivers and sensors of the
same brand. The control of garage doors and gates is not recommended and therefore excluded from RollApp.
When configuring or using a home automation system, users must take into account the environment of the home as well as each specific equipment or
any particular situation relative to each of the residents. Users must take additional precautions when remotely configuring connected equipment or when
its operation is likely to affect children, persons with reduced mobility or animals. Users must use the GAPOSA home automation services in their area of
use (see applicable sales documentation) and set up the operating scenarios correctly so that they do not create any risk for the residents of the house.
The functioning of GAPOSA home automation solutions must be tested periodically by the main user. The latter must regularly check the various connec-
tions and operating scenarios. GAPOSA recommends that the connected equipment and its settings be subject to preventive maintenance and regularly
checked by a home automation professional, at the initiative of the Primary User.
Technical details
Hub Input Voltage
Hub Input Power
Frequency
Connection
Wi-Fi network
Range
Protection Rate
Operation Temperature
IOT Integration
www.AVOutlet.com
5V
0.3 A Max.
434.15 MHz
Wi-Fi
2.4 GHz only
30 mt / 98 feet
IP20
0°C to 60°C / 32°F to 140°F
works with Amazon Alexa and Google Assistant
GAPOSA srl
via Ete, 90 - 63900 Fermo - Italy
T. +39.0734.220701 - F. +39.0734.226389
[email protected] - www.gaposa.com
LED Status
Blue Blinking - Not Connected to Wifi
Blue Solid - Connected to Wifi
Red Blinking - Transmitting RF Signal
GAPOSA Inc.
3920 Providence Road
Newtown Square PA 19073
Ph. 610 325 3697