Avantco 178SS1RGHC Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku Avantco 178SS1RGHC. Avantco 178SS1RGHC 9 halaman. Reach-in refrigerators and freezers
Juga untuk Avantco 178SS1RGHC: Panduan Pengguna (8 halaman)

Halaman Cetak

Installation

Please read this manual thoroughly prior to equipment setup, operation, and maintenance.

This unit is intended for use in a temperature-controlled environment of less than 75 degrees

Fahrenheit and 60% relative humidity. Malfunction due to improper conditions is not covered

under warranty.

Important! Please Read Before Installation

• If the shelf has a raised lip, the lip needs to be installed facing up towards the rear of the cabinet

to promote proper air flow. Failure to install the shelves properly is considered user error and is

not covered by warranty.

• If the unit has recently been transported on its side, please let unit stand upright for a minimum

of 24 hours before plugging it in.

• Make sure that the unit has reached the desired temperature before loading the unit with

products. This unit is meant for keeping cold products cold, not chilling warm products.

• Make sure that there is proper ventilation around the unit in the area where it will operate.

• Make sure all accessories are installed (i.e., shelves, shelf clips, casters) before plugging the

unit in.

• Do not attempt to remove or repair any component of the unit. Consult an authorized service

technician for servicing/repair.

• Do not hang on doors or stand inside the unit.

• Please read through the manual in its entirety.

• This unit is designed to perform in a temperature-controlled environment at 60% relative

humidity. The unit should be located away from doors, air ducts, and fans that could disrupt

airflow and negatively impact performance.

Field Convertible Doors

The Avantco 178SS1RHC and 178SS1FHC both ship with a right-hinged door design. If

you would like to convert the reach-in to a left hinged door design (solid door models), you

must purchase the left hinges seperately (Avantco item #178SS1KITFR ) and follow these

instructions:

Tools Needed:

• Socket Set

• Pliers

• Adjustable Wrench

• Phillips Head Screwdriver

User Manual

SS Series Reach-In Refrigerators and Freezers