Makita 2012NB Buku Petunjuk - Halaman 10
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 2012NB. Makita 2012NB 13 halaman. Thicknesser
Juga untuk Makita 2012NB: Buku Petunjuk (13 halaman), Buku Petunjuk (14 halaman), Buku Petunjuk (20 halaman), Buku Petunjuk (17 halaman)
Halaman Cetak
003729
Keeping blades sharp
Dull blades can cause rough finish, an overload of the
motor and dangerous kickback of the workpiece.
Replace dull blades immediately.
Lubrication
1
2
003730
Oil the chain (after removing the side cover R), the four
columns and the screws for elevating the main frame.
This periodic lubrication should be performed with
machine oil.
CAUTION:
Oiling and all maintenance should be done with the
•
tool turned off and unplugged.
Cleaning
Always brush off dirt, chips and foreign matter adhering
to the roller surfaces, motor vents and drums.
Limit for re-sharpening of standard blade
1
3
004478
Do not use the standard blade whose blade length is
under 4 mm.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
1. Brush holder cap
2. Screwdriver
1
2
1. Column
2. Screw
3. Chain
3
1. Base
2. Blade
3. More than 4 mm
2
ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Magnetic holder
•
Throw-away blade
•
Standard blade
•
Blade gauge
•
Socket wrench 9
•
Hex wrench 2.5
•
Hood set
•
Stand
•
10
or
attachments
Only use
accessory or
are