Makita 3601B Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 3601B. Makita 3601B 20 halaman. Router
Juga untuk Makita 3601B: Buku Petunjuk (13 halaman), Buku Petunjuk (13 halaman)

Halaman Cetak
Makita 3601B Buku Petunjuk
Straight guide (Optional accessory)
The straight guide is effectively used for
straight cuts when chamfering or grooving.
To install the straight guide, insert the
guide bar into the hole in the tool base
until the notch in the guide bar reaches just
under the wing bolt (B). Then tighten the
wing bolt
(B). Loosen
the wing bolt
(A)
and adjust the distance between the bit and
the straight guide. Then tighten the wing
bolt ( A ) to secure the straight guide in
place.
Straight guide
Guide
bar
When cutting, move the tool with the straight guide flush with the side of the workpiece.
7