IKEA tradfri Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Pencahayaan IKEA tradfri. IKEA tradfri 24 halaman. Motion sensor
Juga untuk IKEA tradfri: Panduan Pengguna (36 halaman), Manual Petunjuk Perakitan (36 halaman), Manual Petunjuk Perakitan (24 halaman), Manual (12 halaman), Manual (28 halaman), Manual (20 halaman), Manual (16 halaman), Manual (20 halaman), Panduan Cepat (36 halaman), Manual (16 halaman), Manual (32 halaman), Manual (12 halaman), Manual (8 halaman), Manual (24 halaman), Manual (24 halaman), Manual (32 halaman), Manual (24 halaman), Manual (32 halaman), Manual (32 halaman), Manual (24 halaman), Manual (12 halaman), Manual (24 halaman), Manual (24 halaman), Manual (29 halaman), Manual (12 halaman), Panduan Memulai Cepat (12 halaman), Manual (40 halaman), Panduan Memulai Cepat (24 halaman), Panduan Memulai Cepat (16 halaman), Manual (16 halaman), Manual (24 halaman), Manual (32 halaman), Panduan Memulai Cepat (2 halaman), Manual (40 halaman), Panduan Memulai Cepat (16 halaman), Manual (36 halaman), Manual (28 halaman), Panduan Memulai Cepat (2 halaman), Manual (32 halaman), Manual (32 halaman), Manual (24 halaman), Petunjuk Manual (8 halaman), Manual (24 halaman), Panduan Memulai Cepat (4 halaman), Manual (8 halaman), Manual (20 halaman), Manual (12 halaman), Manual (8 halaman), Manual (32 halaman)

ENGLISH

ADD LIGHT SOURCES TO

YOUR STEERING DEVICE:

Before you can use your light

source you'll need to pair it with

a steering device.

To add more light sources, just

repeat the steps below:

1. Make sure that your light

source is installed and the

main power switch is turned

on.

2. Hold the steering device close

to the light source you want

to add (no more than 5 cm

away).

3. Press and hold the pairing

button

seconds. A red light will

shine steadily on the steering

device. Your light source will

begin to dim and finally flash

one time to indicate that it has

been successfully paired.

Up to 10 light sources can be

paired with 1 steering device.

Make sure to pair them one at

a time. If the light sources are

close to each other, disconnect

those that have already been

paired from the main power

switch.

for at least 10