Garage Smart Multi-Bike Lifter Instalasi dan Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Sistem Pengangkatan Garage Smart Multi-Bike Lifter. Garage Smart Multi-Bike Lifter 16 halaman.
Halaman Cetak
4. Place your bicycles under the Multi-Bike Lifter with the middle bike facing the
opposite direction from the two outside bikes.
The total weight of the bikes and the Multi-Bike Lifter cannot exceed 100
pounds. Attempting to lift more than 100 pounds may cause property damage,
serious personal injury, or death.
5. Using the six D-Ring lifting straps, secure your bicycles to the lifter frame by looping
the straps through the spokes of the wheels and back to an adjacent hook on the
lifter frame.
6. Tighten the straps to make each bike level with the ground.
7. Turn the crank handle on the Multi-Bike Lifter frame to make each bike level with
the others. Use the level on the balancing frame to find the balance point.
8. When you think the lifter frame is balanced, use the MyLifter app to lift the bike a
few inches off the floor.
9. If the load is not balanced and the lifter frame is not level, turn the crank handle until
everything is level.
10. When the bikes are level and the load is balanced, place an arrow sticker on the
pulley slider and another one on the lifter frame.
DANGER
13