CORNING LSE 6765-HS Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Laboratorium CORNING LSE 6765-HS. CORNING LSE 6765-HS 16 halaman. High speed microcentrifuge

Halaman Cetak

1. General Information

This manual provides important safety information for the Corning

Microcentrifuge. It should be kept near the centrifuge for quick and easy reference.

1.1 Description

The Corning LSE High Speed Microcentrifuge is a small benchtop centrifuge

designed for separation of various research samples. The motor is brushless and

requires no routine maintenance. The Corning LSE High Speed Microcentrifuge is

supplied with a 24 x 1.5/2.0 mL rotor for micro samples. Adapters are available for

tubes smaller than 1.5 mL. The Corning LSE High Speed Microcentrifuge reaches

speeds of up to 13,300 rpm/16,300 x g.

1.2 Safety precautions

Note: All users of the centrifuge must read the Safety Precautions section of

this manual before attempting to operate the unit!

If this equipment is used in a manner not specified by the manufacturer, the

protection provided by the equipment may be impaired.

DO NOT OPERATE the centrifuge IF any of the following conditions exist:

 The centrifuge has not been installed properly

 The centrifuge is partially dismantled

 Service has been attempted by unauthorized or unqualified personnel

 The rotor has not been installed securely on the motor shaft

 Rotors and accessories not belonging to the standard range are being used

without permission being obtained from the manufacturer to use such rotors

and/or accessories in the centrifuge

Exception: Microcentrifuge tubes made of plastic, normally available in the

laboratory

 The centrifuge is located in an explosive atmosphere

 Materials to be centrifuged are combustible and/or explosive

 Materials to be centrifuged are chemically reactive

 The rotor load is not properly balanced

 The rotor nut was not tightened with a wrench



LSE High Speed