Makita 3901 Buku Petunjuk - Halaman 2
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita 3901. Makita 3901 12 halaman. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Juga untuk Makita 3901: Brosur (1 halaman), Buku Petunjuk (16 halaman), Buku Petunjuk (17 halaman)
Halaman Cetak
ENGLISH (Original instructions)
SPECIFICATIONS
Blade size
Max. Cutting depth
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for cutting crescent shaped slots for
the placement of flat wooden dowels or biscuit by a
plunging action.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Model
Cutter blade
(Outer dia. x Width x Arbor dia.)
Circular saw blade
(Outer dia. x Arbor dia.)
Cutter blade
Circular saw blade
-1
)
Overall length
Net weight
Safety class
equipment
and
environmentally
compatible
END201-5
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The
vibration
determined according to EN60745:
Work mode : rotation without load
Vibration emission (a
its
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
ENE013-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
ENF002-1
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
3901
100 x 4 x 22 mm
110 x 20 mm
20 mm
25 mm
11,000
307 mm
3.0 kg
/II
) : 87 dB(A)
pA
) : 98 dB(A)
WA
Wear ear protection
total
value
(tri-axial
2
) : 2.5 m/s
or less
h
2
ENG102-3
ENG224-2
vector
sum)
ENG901-1