CORNING Matribot Bioprinter Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Laboratorium CORNING Matribot Bioprinter. CORNING Matribot Bioprinter 2 halaman. Demonstration equipment
Juga untuk CORNING Matribot Bioprinter: Petunjuk Manual (8 halaman)
Halaman Cetak
How to Return the Corning® Matribot® Bioprinter
Please follow the complete instructions (pages 4 to 7) in the
(CLS-AN-670DOC).
Summary:
At the end of the last experiment, before returning the bioprinter, use the knob to select Prepare Bioprint and select Home Axes. This
◗
returns the printbed and printhead to the home position. Then, navigate to the Utilities menu and confirm that SD print is not enabled.
Clean the Corning Matribot bioprinter according to the instructions (page 4) using >70% (v/v) ethanol. Spray the surface, and wipe with
◗
a soft cloth while wearing gloves to avoid direct contact with the unit.
Repack the Matribot Bioprinter according to the instructions (pages 4-6).
◗
The return shipping label is included in the consumables box. Please attach this to the shipping box once packaged.
◗
Please inform your local Corning Representative the demo has been completed and the Corning Matribot bioprinter is being returned.
◗
For any questions, please contact a Corning representative.
Warranty/Disclaimer: Unless otherwise specified, all products are for research use or general laboratory use only.* Not intended for use in diagnostic
or therapeutic procedures. Not for use in humans. These products are not intended to mitigate the presence of microorganisms on surfaces or in the
environment, where such organisms can be deleterious to humans or the environment. Corning Life Sciences makes no claims regarding the performance
of these products for clinical or diagnostic applications. *For a listing of US medical devices, regulatory classifications or specific information on claims, visit
www.corning.com/resources.
Corning's products are not specifically designed and tested for diagnostic testing. Many Corning products, though not specific for diagnostic testing, can be
used in the workflow and preparation of the test at the customers discretion. Customers may use these products to support their claims. We cannot make any
claims or statements that our products are approved for diagnostic testing either directly or indirectly. The customer is responsible for any testing, validation,
and/or regulatory submissions that may be required to support the safety and efficacy of their intended application.
Corning Incorporated
Life Sciences
www.corning.com/lifesciences
For a listing of trademarks, visit www.corning.com/clstrademarks. All other trademarks are the property of their respective owners.
© 2022 Corning Incorporated. All rights reserved. 9/22 CLS-AN-708DOC REV1
NORTH AMERICA
t 800.492.1110
t 978.442.2200
ASIA/PACIFIC
Australia/New Zealand
t 61 427286832
Chinese Mainland
t 86 21 3338 4338
Corning Matribot Bioprinter Demonstration Equipment Instructions
India
EUROPE
t 91 124 4604000
Japan
France
t 81 3-3586 1996
t 0800 916 882
Korea
Germany
t 82 2-796-9500
t 0800 101 1153
Singapore
The Netherlands
t 65 6572-9740
t 020 655 79 28
Taiwan
United Kingdom
t 886 2-2716-0338
t 0800 376 8660
All Other European Countries
t +31 (0) 206 59 60 51
LATIN AMERICA
Brazil
t 55 (11) 3089-7400
Mexico
t (52-81) 8158-8400