CORNING PC-400D Buku Petunjuk - Halaman 8
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Laboratorium CORNING PC-400D. CORNING PC-400D 11 halaman. Digital hot plates, stirring hot plates, stirrers, and external temperature controller
Juga untuk CORNING PC-400D: Buku Petunjuk (8 halaman), Buku Petunjuk (14 halaman), Buku Petunjuk (14 halaman)
Halaman Cetak
Ceramic Top Plate
These products are supplied with Corning's proprietary Pyroceram
Q
top that is easy to clean and highly resistant to scratches, corrosion,
and chemical attack.
The ceramic top may break during use if not properly maintained.
Q
Keep the ceramic top clean. A nonabrasive cleaner may be used to
Q
clean the ceramic top.
Inspect the ceramic top for damage during cleaning.
Q
Discontinue product use if the ceramic top is chipped, etched, or
Q
shows excessive scratching. A replacement top can be ordered. See
page 12 for details.
Contact Corning or a Corning authorized repair facility for top
Q
replacement.
General
It is important to keep this product dry and clean.
Q
Remove minor exterior liquid spills promptly.
Q
Clean exterior surfaces with a nonabrasive cleaner. Do not reconnect
Q
product to power input until all cleaned surfaces have dried.
If liquid or wet solid material gets inside the product, immediately
Q
disconnect power to the product and discontinue use. Contact
Corning for additional instructions regarding interior spills.
10
®
Optional Accessories
Corning
Catalog No.
6795PR
440129
440140
440141
6795KIT
6795-420KIT
6795-620KIT
400430
401435
6970SR
Accessories (Shown with 6795-420D)
Description
External Temperature Controller for Digital Display Hotplate and
Hotplate/Stirrer – used for all PC-400D, 420D, 600D, and 620D models.
FEP coated stainless steel.
Vertical Support Rod: Supplied as two 9" [22.86 cm] rods which can be
screwed together – can be used with all PC-XXXD series products. Stainless
steel.
Boss Head Clamp – used for connecting the 440141 Holding Rod at a 90°
angle to the 440129 Support Rod. Aluminum.
Holding Rod – used for holding the 6795PR External Temperature Controller
in position. Aluminum.
Universal Accessories Kit includes: 6795PR, 6970SR, and 440129
Kit includes: 6795-420D Stirrer/Hot Plate, 6795PR, 6970SR, and 440129
Kit includes: 6795-620D Stirrer/Hot Plate, 6795PR, 6970SR, and 440129
PTFE coated magnetic stir bar, 1 x 5.1 cm (.39" x 2") – recommended size for
all PC-610D and 620D models.
PTFE coated magnetic stir bar, 1 x 2.5 cm (.39" x 1") – recommended size for
all PC-410D and 420D models.
Stir Bar Retriever, polypropylene
11